Siemens Gigaset DX800A all in one Setup & User Manual page 29

Personal Provider Data area
Enter the configuration data that is required to access your VoIP provider's SIP
service. This data can be obtained from your VoIP provider.
The field names (Authentication name etc.) of this area listed below are default
names and may change. If you have already downloaded the provider's general
details ("Select VoIP Provider" button, see above), field entries will be replaced by
provider-specific names to facilitate orientation (e.g., SIP-ID instead of
Authentication name).
Authentication name
Specify the registration or authentication ID agreed with your VoIP provider
(maximum 32 digits). The registration ID serves as the access ID that your phone
must specify when registering with the SIP proxy/registrar server. The
Authentication name is usually identical to the Username, i.e., to your Internet
phone number.
Authentication password
Enter the password that you have agreed with your VoIP provider in the
Authentication password field (maximum 32 characters). The phone needs the
password when registering with the SIP proxy/registrar server.
Username
Enter the caller ID for your VoIP provider account (maximum 32 characters).
This ID is usually identical to the first part of your SIP address (URI, your Internet
phone number).
Example: If your SIP address is "987654321@provider.com", enter
"987654321" as the Username.
Display name (optional)
Enter any name that should be shown in the other caller's display when you call
them via the Internet (example: Anna Sand). All characters in the UTF8 character
set (Unicode) are permitted. The name must not exceed 32 characters.
If you do not enter a name, your Username or your VoIP phone number will be
displayed.
Ask your VoIP provider if this feature is supported.
General data of your service provider area
If you have downloaded the general settings for the VoIP provider from the config-
uration server
from the download. Generally speaking, you do not need to configure any settings
in this area.
Domain
Specify the last part of your SIP address (URI) here (maximum 74 characters).
For the SIP address "987654321@provider.com", enter "provider.com" in
Domain.
26
Example
¢
( page 25), then the fields in this area will be preset with the data
Example