Installing and removing the hard disk
Open the casing (see "Opening the casing" chapter).
Removing the hard disk
Remove the data and the power supply connector from the the hard disk drive.
Handle the latch, fold open it in the direction of the arrow (1) and release it out of the anchor (2).
1
2
Handle both hooks (1) of the hard disk and pull the hard disk out of the drive cage in the direction
of the arrow.
1
1
Remove the hard disk from the bracket in the direction of the arrow.
If you do not intend to install a new hard disk, slide the bracket back into the slot. Then close off
the slot with the lock.
43