Preparing For Use; Unpacking And Checking The Delivery; Steps For Initial Setup - Fujitsu DESKPOWER C600 User Manual

1 Preparing for Use

CAUTION
Please take note of the safety information in the "Important notes" chapter.

Unpacking and checking the delivery

It is recommended not to throw away the original packaging material! It may be required for reshipment
at some later date.
Unpack all the individual parts.
Check the delivery for damage incurred during transportation.
Check whether the delivery agrees with the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery note, notify your local sales
outlet immediately.

Steps for initial setup

Only a few steps are necessary to put your new PC into operation for the first time:
– Select location for PC and set up PC
– Connect the monitor, mouse and keyboard
– Check the voltage at the mains outlet and connect the PC to an electrical outlet
– enable PC
You will learn more about the individual steps in the following sections.
External devices
If you have received other devices in addition to your PC (e.g. a printer or a modem), do
not connect these until after the initial installation. The following sections contain a
description of how to connect these external devices: "Connecting external devices to
the serial port" and "Connecting external devices to the parallel port".
Drives and boards
If you have received drives or boards with your PC, please do not install them until after
first-time setup. How to install drives and boards is described in the "System expansions"
chapter.
2