<Method to fix the Lead wire of the motor connector portion>
1) Lay down the washing machine.
2) Remove the bottom plate A.
4) Remove the lead wire holder (2portions).
Insert from left
6) Insert the lead wire holder (insulock block
type) in to the motor cover B from left side.
Lead wire holder
Motor cover B
-39-
NA-168VX2/168VG2/148VA2/128VA2/147VB2
3) Check condition of the lead wire holders
(wire type).
Lead wire holder
5) Fix the lead wire holder (insulock block type)
on to the isolating tape portion temporarily.
7) Clamp and fix the lead wire holder (insulock
block type) to the motor cover B, and cut the
surplus portion of the lead wire holder by pliers.