Panasonic NA-168VX2 Service Manual page 36

NA-168VX2/168VG2/148VA2/128VA2/147VB2
Description
18 Replacement
of the drain pump
19 Replacement
of the geared
motor
20 Replacement
of the valve
packing unit
Figure
1.Remove the two hose clamps and 2 hoses from
the drain pump.
2.Remove the three screws mounting the drain
pump.
3.Push the drum unit left slightly, and take the
drain pump unit out.
4.Remove the two covers and remove the three
connectors from the drain pump.
5.Remove the one screw mounting the switching
sensor, remove the switching sensor.
6.Remove the drain pump.
After lay down the washing machine on it left side
1.Remove the four screws mounting the bottom
plate A, remove the bottom plate A.
Note:
Please spread a cloth to prevent scratch on the
body.
2.Remove the two bolts mounting the geared motor
by the box wrench (size 10mm).
3.Remove the one connector from the geared motor.
After lay down the washing machine on it left side
and remove the bottom plate A.
1.Turn the valve lid to counter-clock wise.
2.Pull out the valve packing unit from the valve
frame.
Note:
Please spread a cloth to prevent scratch on the
body.
-36-
Procedure