Other Messages; Garo Wxxxx (X Represents A Number); Error Exxx-Xxxx (X Represents A Letter Or Number); Hardware Error. Xxxxxxxx-Xxxx (X Represents A Letter Or Number) - Canon iPF780 Series Basic Manual

GARO Wxxxx (x represents a number)

Other Messages

Other Messages
GARO Wxxxx (x represents a number) ............................................................................................................... 128

ERROR Exxx-xxxx (x represents a letter or number) .................................................................................... 128

Hardware error. xxxxxxxx-xxxx (x represents a letter or number) .......................................................... 128

Top cover is open. ........................................................................................................................................................ 129
Prepare for parts replacement. .............................................................................................................................. 129
Parts replacement time has passed. .................................................................................................................... 129
Unknown file. .................................................................................................................................................................. 129
Multi-sensor error ......................................................................................................................................................... 129
Error in cutter position. .............................................................................................................................................. 129
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
An error requiring service may have occurred.
128
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Cause
Write down the error code and message, turn off the printer, and contact your Can-
on dealer for assistance.
Cause
Corrective Action
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the printer be-
fore restoring power.
Turn off the printer, open the Top Cover and remove the
tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds before
restoring the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
iPF780 Series
Basic Guide