Copy Status Messages; Copy Error Messages - Lexmark 3200 User Manual

Problem
Unwanted black lines print on my copy
Paper does not feed through the automatic
document feeder

Copy status messages

Message
Ready 100% 1
Copying...
Busy 100% 1
Copy Halted...
Wait 100% 1
Place Next
Or Stop

Copy error messages

Error
Check
Printer
Check Scanner
Press Return
Solution
Clean the entire top cover and the document flatbed.
Also clean the automatic document feeder.
Make sure the paper support is open.
Make sure the pages to be copied are not damaged or
stapled together.
Description
MFP is set for copy mode. This is the default setting for the control panel.
Copy job is printing. If a copy job is printing, this message appears even
when a fax is being sent or received.
Copy job is being canceled.
1 Place the next page on the flatbed.
2 Press Go/Send to continue sending pages.
3 Press Stop/Clear to end the scan.
The control panel resets to copy mode and the Ready message appears
on the display.
Description
There is a problem with the printer, such as a paper jam, open door,
missing tray, or toner problem. Check the printer operator panel for a
detailed message.
For more help solving the problem, refer to the documentation that
shipped with the printer.
There is a problem with the scanner.
1 Check that all the cables and power cords are still correctly plugged
into the scanner.
2 Turn off the MFP hardware, then power back up. First, turn on the
scanner, then turn the printer back on.
3 If you are unable to reset the MFP, contact Lexmark Customer Support.
On the MFP CD, click Contact Lexmark.
Copy status messages
39