Removing The Spare Tire And Tools - Chevrolet 2004 Venture Owner's Manual

Removing the Spare Tire and Tools

To remove the tools, do the following:
1. Remove the side convenience net.
2. Open the jack storage compartment by lifting up the
tab and pulling the cover off.
5-80
The tools you will need are
located in the storage
compartment at the rear of
the vehicle, on the
passenger's side.
A. Jack
B. Strap
C. Bracket
D. Wing Nut
E. Jacking Instructions
3. Remove the jack and jacking tools by loosening the
wing nut and bracket.
4. Separate the plastic pouch from the jack and
remove the jacking tools, including the folding
wrench and extension, from the pouch.
F. Bag and Tools
G. Tire Bag and Cable
(All-Wheel Drive
(AWD) only)