Table of Contents
Advertisement
Figure 5 Orient the camera flex cables on the three position pins marked with red
arrows.
Figure 6 Orient the camera clamping frame on the three position pins and fixate
it with the two flat nuts.
3.2 KEYBOARD
Figure 7 The components used when mounting the key board is: 1) three flat
nuts 2) keyboard clamping frame, 3) keyboard main 4) keyboard flex module.
APPENDIX
Setup & Maintenance Instructions for W890 TRS Fixture
Figure 8 Place the keyboard flex module in position. Position the keyboard flex
module with the two position pins and two screws.
Figure 9 Place the keyboard main on the keyboard flex module.
Figure 10 Place the keyboard clamping frame and fixate it with two flat nuts (red
arrows). The function of the third flat nut (orange arrow) is to hold the vibrator
underneath.
SEMC Troubleshooting Manual
W890
1217-3942 rev. 1
114
(119)
Advertisement
Table of Contents
Troubleshooting
