Pantouch Interface - Pandigital PAN1200DWPTFR User Manual

Replace the Remote Control Battery
1. Hold the remote control with the buttons facing down.
2. Push and hold the small release tab while pulling the
battery tray out.
3. Replace the "CR2025" Lithium battery on the tray with
the positive (+) side facing up.
Push the tray back in until it clicks into place.
4.

PanTouch Interface

This DPF includes our
interface allowing you to navigate through all the DPF features and
functions.
The touch sensors are located strategically along the top and right edge
of the frame under the paper mat and are activated by simply touching
the activation point in the upper right corner.
The navigation icons appear for 5 seconds (without any user interaction),
and then disappear until you activate the PanTouch interface again.
While the PanTouch interface is active, the remote control will be
inoperable.
Throughout this User Guide, this hand icon depicts the specific use
of the PanTouch interface.
12
technology, a touch icon-driven
PanTouch
SENSORS AREA
Release tab
PanTouch Interface
activation point
S
E
N
S
O
R
S