Indoor Unit Functions - LG multi V PLUS Service Manual

2. Functions
Indoor Unit
Operation ON/OFF by Remote controller
Sensing the Room Temperature
Room temperature control
Starting Current Control
Time Delay Safety Control
Indoor Fan Speed Control
Soft Dry Operation Mode
Airflow Direction Control
Auto Restart
• Although the air-conditioner is turned off by a power failure, it is restarted auto-
Deice (defrost) control (Heating)
Hot-start Control (Heating)
Compact and light design
Low noise
Long life filter
High head Drain pump
High-Ceiling corresponding Function
Central Control(Optional)
• Room temperature sensor. (Thermistor)
• Maintains the room temperature in accordance with the Setting temperature
• Indoor fan is delayed for 5 seconds at the starting.
• Restarting is inhibited for approx. 3 minutes.
• Jet, High, Med, Low
• Intermittent operation of fan at low speed.
• The louver can be set at swing up and down automatically.
matically previous operation mode after power supply.
• Both the indoor and outdoor fan stops during defrosting.
• Hot start after defrost ends.
• The indoor fan does not rotate until the evaporator pip-
ing temperature will be reached at 25°C.
• To install a unit is very convenient because of smaller
size than textile.
• The most advanced low-noise design.
• The adoption of turbo fan and round type heat exchang-
er give the quietest operation.
• Long life wrinkle(type) and washable and anti-bacteria
filter is adopted.
• Built-in drain pump automatically drains water.
• A standard drain-head height of up to 700mm is possible.
• According to the height of ceiling, the RPM of indoor fan
motor is selected to increase air reaching distance.
• It is operating individually or totally by central control function.
Functions
Service Manual 27