Select The Installation Locations; Location For Installing Indoor Unit; Location For Installing Outdoor Unit - LG MW122C4 Installation Manual

SELECT THE INSTALLATION LOCATIONS

Location for Installing Indoor
Unit
• Where there is no obstacle near the air outlet
andair can be easily blown to every corner.
• Where piping and wall hole can be easily
arranged.
• Keep the required space from the unit to the
ceiling and wall according to the installation
diagram on previous page.
• Where the air filter can be easily removed.
• Keep the unit and remote controller 1m or more
apart from television, radio etc.
• Keep as far as possible from fluorescent lamps.
• Do not put anything near the air inlet to obstruct it
from air absorption.
• Install on a wall that is strong enough to bear the
weight of the unit.
• Install in a place that will not increase operation
noise and vibration.
• Keep away from direct sunlight and heating
sources.
• Do not place flammable materials or combustion
apparatuses on top of the unit.
Indoor unit
Pipe length is
15 meters Max.
Outdoor unit
Location for Installing
Outdoor Unit
• Where it is convenient to install and well
ventilated.
• Avoid installing it where flammable gas could leak.
• Keep the required distance apart from the wall.
• The pipe length between indoor and outdoor
unit should be not more than 5 meters in factory
default status, but it can go up to maximum 15
meters with additional refrigerant charge.
Pipe length is
15 meters Max.
Indoor unit
• Keep the outdoor unit away from greasy dirt,
vulcanization gas exit.
• Avoid installing it by the roadside where there is a
risk of muddy water.
• A fixed base where it is not subject to increased
operation noise.
• Where there is not any blockage of the air outlet.
• Avoid installing under direct sunlight, in an aisle or
sideway, or near heat sources and ventilation fans.
• Keep away from flammable materials, thick oil fog,
and wet or uneven places.
EN
Outdoor unit
9