Adjusting The Screen Refresh Rate - BenQ V2210B User Manual

Adjusting the screen refresh rate

You don't have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. Check next chapter to see the factory modes:
modes on page 33.
You can choose 59.934 Hertz for the native resolution of 1920 x 1080. Not applicable in all models. Please
refer to the table on
1. Double click the
2. From the
Display Properties
button.
3. Select the
Adapter
factory modes as listed in the specification table.
4. Click
Change
5. Close the
Display Properties
32 Adjusting the screen refresh rate
page 31.
icon in
Display Control Panel
window, select the
tab, and select an appropriate refresh rate to match one of the applicable
, , then .
OK Yes
window.
.
tab and click the
Settings
Preset display
Advanced