How To Detach The Stand Base - BenQ V2210B User Manual

5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button.
Turn on the computer too, and follow the instructions in
Getting the most from your BenQ monitor
Section 4:
on page 9
to install the monitor software.

How to detach the stand base

1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before unplugging
the monitor signal cable.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
2. Press the locking clips to detach the monitor base
from the monitor stand arm.
8 How to assemble your monitor hardware