Adjusting The Screen Refresh Rate - BenQ V2410T User Manual

Adjusting the screen refresh rate

You don't have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. Check next chapter to see the factory modes:
modes on page 35.
You can choose 59.934 Hertz for the native resolution of 1920 x 1080. Not applicable in all models. Please
refer to the table on
1. Double click the
2. From the Display Properties
button.
3. Select the Adapter
factory modes as listed in the specification table.
4. Click Change
5. Close the Display Properties
34 Adjusting the screen refresh rate
page 33.
Display icon in Control Panel
window, select the
tab, and select an appropriate refresh rate to match one of the applicable
, OK , then Yes .
window.
.
Settings tab and click the
Preset display
Advanced