Replacing The Filterbag; When To Change The Dust Compartment Filter (Pre-Motor Filter); Replacing The Dust Compartment Filter (Pre-Motor Filter); When To Replace The Airclean Exhaust Filter - Miele Classic C1 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

en
^ Turn the vacuum cleaner on and
select the highest power setting.
^ Lift the floor brush slightly off the
floor. If the marker completely fills the
indicator window, the FilterBag needs
to be changed.
How the FilterBag change indicator
works
The airflow indicator is designed to
show when the bag is full of common
household dust and measures the
amount of air flow through the FilterBag.
Normal household dust is a mixture of
dust, hair, carpet fluff, threads, sand,
etc.
However, if fine dust, such as drill dust,
sand, plaster or flour is vacuumed, the
pores of the FilterBag may become
blocked. The marker will indicate that
the bag is "full" even when it is not. The
FilterBag should be changed as the
suction power is greatly reduced.
If the bag is bulging with pet fur, hair,
carpet fluff, etc. the indicator may not
register "full". This is because the air
flow of the FilterBag may still be high
enough not to activate the marker to
show maximum. The FilterBag should
still be changed.

Replacing the FilterBag

(see fig. 17 and 18)
^ Open the dust compartment lid and
raise until it clicks into place.
The FilterBag has a closing flap which
closes automatically when the dust
compartment lid is raised to prevent
any dust from escaping.
14
a Grasp the finger grip and pull the
FilterBag out of the holder.
b Insert the new FilterBag as far as it
will go into the holder. Do not unfold
the FilterBag when taking it out of the
box.
^ Unfold the FilterBag in the dust
compartment.
^ Push the dust compartment lid closed
until it clicks into place. Take care not
to jam the FilterBag in the lid.
,
An empty-operation-barrier
blocks the dust compartment lid
from closing if no bag is inserted.
Do not force it closed.
When to change the dust compart-
ment filter (Pre-motor filter)
Change the filter each time you open a
new box of genuine Miele FilterBags. A
dust compartment filter is supplied with
each box.
Replacing the dust compartment
filter (Pre-motor filter) (see fig. 19)
^ Open the dust compartment lid.
^ Open the filter frame, remove the old
filter, and insert a new filter.
^ Close the filter frame.
^ Close the dust compartment lid.
When to replace the AirClean
exhaust filter
Each time a new box of Miele FilterBags
is opened, this filter should be changed.
A new AirClean exhaust filter is included
in every box of Miele FilterBags.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Classic c1 hs12

Table of Contents