Using The Included Accessories; Operation; Power Cord; Unwinding / Rewinding - Miele Classic C1 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Using the included accessories

(see fig. 6)
The following accessories are included:
a Dust brush with natural bristles
b Upholstery tool
c Crevice nozzle
d Accessory clip for the included
accessories
Position the accessories as indicated.
Accessory clip (see fig. 7)
^ Press the accessory clip either above
the hose connector or below the
suction hose. Be sure it clicks into
place.
Floor brush Hardfloor-3 (see fig. 8)
(depending on model)
Special brush with natural bristles
intended for cleaning parquet and
laminate floors, especially those
susceptible to scratching.
The parquet floor brush can be cleaned
with the vacuum cleaner using the
crevice nozzle if necessary.

Operation

Power cord

,
Unwind the cord completely to
aid the vacuum in dissipating heat.
Do not pull or carry by the cord, use
the cord as a handle, close a door
on the cord, or pull the cord around
sharp edges or corners. Do not run
the appliance over the cord. Keep
the cord away from heated surfaces.
Do not unplug by pulling the cord. To
unplug grasp the plug, not the cord.
This appliance is equipped with a
power cord reel. Hold the plug when
rewinding onto cord reel. Do not
allow plug to whip when rewinding.
Unwinding / Rewinding (see fig. 9)
a Hold the plug and pull out the power
cord.
,
To reduce the risk of electric
shock, the vacuum has a polarized
plug (one blade is wider than the ot-
her). This plug will fit in a polarized
outlet only one way. If the plug does
not fit fully in the outlet, contact a
qualified electrician. Do not alter the
plug in any way.
Danger of overheating and damage.
^ Unplug the vacuum from the outlet.
b Press the rewind switch - the power
cord will rewind automatically. Hold
the plug so that it does not whip
around when rewinding.
en
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Classic c1 hs12

Table of Contents