Before Using The Vacuum Cleaner - Miele Classic C1 Operating Instructions Manual

en
The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.
Before using the vacuum
cleaner
Connecting the hose (see fig. 1)
a Insert the hose connector in the
suction socket until it clicks into
place.
Disconnecting the hose
b Press the release buttons at the
sides of the hose connector and lift
the hose from the socket.
Connecting the suction hose and
handpiece (see fig. 2)
^ Insert the hose into the handpiece
until it clicks into place.
Connecting the hand piece and wand
(see fig. 3)
^ Insert the hand piece into the wand
until it clicks into place. Use the inlet
guides to direct insertion.
Releasing the hand grip
^ Press the lock release button and pull
the hand piece away from the wand.
Adjusting the telescopic wand
(see fig. 4)
One part of the telescopic wand is fitted
inside the other and can be adjusted to
your height for comfortable vacuum
cleaning.
10
^ Press the telescopic wand release
button to release the tubes and
adjust to the desired height.
Using the standard floor brush
(depending on model)
Observe the cleaning instructions of
the floor manufacturer.
The floor brush is suitable for cleaning
carpets, rugs, carpeted stairs and hard
surfaces that are not susceptible to
scratching.
It is also suitable for vacuuming stairs.
,
For your own safety, always
vacuum stairs from bottom to top.
Connecting and adjusting the
standard floor brush (see fig. 5)
(depending on model)
a Place the floor brush into the suction
hose and twist until it clicks into place.
b To separate the parts, press the lock
release button and pull apart.
c For vacuuming carpets and rugs,
lower the tool by pressing the foot
switch %, for cleaning hard floors,
raise the tool by pressing the foot
switch ).
Always use the floor brush with the
bristles raised to clean floors with
very deep joints or gaps.