HPI Racing SAVAGE Flux HP Instruction Manual

HPI Racing SAVAGE Flux HP Instruction Manual

Hpi racing savage flux hp motorized toy car
Hide thumbs Also See for SAVAGE Flux HP:

Advertisement

Instruction Manual
En
Bauanleitung
De
Manuel de montage
Fr
1
RTR SAVAGE FLUX HP WITH GT-2 TRUCK BODY
En
De Fr
Jp
100924

Advertisement

Table of Contents
loading

Summary of Contents for HPI Racing SAVAGE Flux HP

  • Page 1 Instruction Manual Bauanleitung Manuel de montage RTR SAVAGE FLUX HP WITH GT-2 TRUCK BODY De Fr 100924...
  • Page 2: Thank You

    Thank you Thank you for selecting this HPI RACING product ! This kit is designed to be fun to drive and uses top quality parts for durability and perfor- mance. The instruction manual you are reading was designed to be easy to follow yet thorough in its explanations. HPI Racing wants you to enjoy driving your new R/C kit.
  • Page 3 Merci Merci d’avoir choisi ce produit HPI Racing ! Ce kit a été conçu pour être amusant à conduire, et utilise des pièces de la plus haute qualité pour la longévité et les performances. Le manuel d’utilisation qui est entre vos mains a été conçu pour vous fournir des explications faciles à suivre mais complètes. HPI Racing espère que vous aurez plaisir à...
  • Page 4: Table Of Contents

    Contents Section Contents Page Overview Start Up Guide Charging battery Setup Before Starting Radio Control Car Operating Procedures Trouble Shooting Maintenance Chassis Maintenance Wheel Maintenance Spur Gear Maintenance Motor and Pinion Gear Replacement Shock Maintenance Diffrential Maintenance Radio Maintenance Parts Reference Exploded View Parts List Option Parts List...
  • Page 5 Table des matières Section Table des matières Page Vue d’ensemble Guide de démarrage Chargement de la batterie Réglages avant le démarrage Procédures de fonctionnement du véhicule radio-commandé Dépannage Entretien Entretien du châssis Entretien des roues Entretien de la couronne Remplacement du moteur et du pignon Entretien des amortisseurs Entretien du différentiel Entretien de la radio...
  • Page 6: Overview

    Overview Vue d’ensemble Übersicht Components Composants Komponenten Radio control car Ferngesteuertes Modellauto Voiture radio-commandée Parts Bag Transmitter Kleinteilebeutel Sender Sachet de pièces détachées Emetteur Included Items Enthaltenes Werkzeug Éléments inclus Z950 Cross Wrench Kreuzschlüssel Clé en croix Z904 2.0mm Z903 Z960 2.5mm Turnbuckle Wrench 4mm / 5.5mm...
  • Page 7 Battery Batterie Batterie 2-3 cell LiPo (7.4 to 11.1v) battery pack 2-3 cellules (7.4-11.1V) Lithium-polymère 2-3 Lipo Zellen (7.4 to 11.1V) betreiben Do not use NiCd/NiMH battery chargers for LiPO batteries. If you do not use a special charger for LiPO batteries, they will be damaged.
  • Page 8: Start Up Guide

    Start Up Guide Guide de démarrage Die ersten Schritte 2 - 1 Charging battery Chargement de la batterie Laden des Fahrakkus Charging The Drive Battery Laden des Fahrakkus Recharge de la batterie motrice First, charge the drive batteries. Laden Sie als erstes die Fahrakkus. Chargez les batteries motrices en premier.
  • Page 9 Preparing The Chassis Vorbereitung des Chassis Préparation du châssis Removing the Body Retrait de la carrosserie Demontage der Karosserie 6203 102219 6203 Body Clip (8mm) Karosserieklammern (8mm) Clip carrosserie (8mm) 6203 Z150 Receiver Antenna Installation Mise en place de l’antenne du récepteur Montage der Empfängerantenne Extend the antenna to the maximum length for best performance.
  • Page 10 Wheely Bar Installation Montage der Wheely Bar Mise en place de jeu de barre anti-cabrage Choose wheelie angle Choose wheelie angle Wählen Sie den Winkel des Wheelie. Wählen Sie den Winkel des Wheelie. Choisissez l'angle de cabrage Choisissez l'angle de cabrage Z664 B030 Large wheel...
  • Page 11 102089 Foam Sheet / Block Set Schaumstoffblock Set Ensemble feuille/blocs mousse 102089 102089 102089 Use foam sheet /blocksto keep your batteries secure. Benutzen Sie Schaumstoff-Blöcke um die Akkus fest zu sichern. Utilisez des blocs de mousse pour maintenir vos piles en toute sécurité. 102089 102089 Foam Sheet / Block Set...
  • Page 12 ESC Setup Deutsch You must setup the ESC before running the first time. After the initial setup, it is not required before every run. P.13 Français Please read through the instructions and get familiar with the procedure before starting setup. The setup process moves quickly, and it will help you to be ready for each step.
  • Page 13 ESC Setup Calibration du contrôleur électronique de vitesse English Sie müssen den Regler beim ersten Einsatz einstellen. Dieser Einstellvorgang ist danach nicht mehr bei jedem Ein- P.12 schalten nötig. Vous devez régler le contrôleur électronique de vitesse avant de le faire fonctionner pour la première fois. Après le réglage initial, il n’est pas nécessaire de le régler de nouveau avant chaque utilisation.
  • Page 14: Radio Control Car Operating Procedures

    2 - 3 Radio Control Car Operating Procedures Procédures de fonctionnement du véhicule radio-commandé Umgang mit Ferngesteuerten Modellautos Turn on transmitter first, then turn on receiver. Attention Make sure no one else is using the same radio frequency as you are using. See page 28. Schalten Sie erst den Sender ein, dann den Empfänger.
  • Page 15 Steering Trim Setup Einstellen der Lenkungstrimmung Réglage du trim de direction Front Vorne Steering Trim Avant Lenkungstrimmung Trim de direction Turn steering trim to set tires in completely centered position. Stellen Sie die Trimmung so ein, dass die Räder geradeaus zeigen. Tournez le trim de direction de fa- çon à...
  • Page 16 Practice Turning Kurven fahren Entraînement au virage Install body and enjoy! Allow the car to cool down for 15 minutes between each run.When the car is running toward the driver, the directions of the steering wheel are reversed. Once you become conformable driving the Savage Flux, practice driving on a track with pylons.
  • Page 17: Trouble Shooting

    Trouble Shooting Dépannage Fehlerbehebung If R/C car does not move or you have no control, see below. Falls sich das Auto nicht bewegt, oder Sie nicht mehr die Kontrolle haben, schauen Sie bitte unten. Si le véhicule télécommandé ne bouge pas ou si vous n’en avez pas le contrôle, voyez ci-dessous. Problem Cause Remedy...
  • Page 18: Maintenance

    Maintenance Entretien Wartung Maintenance schedule Programme d’entretien Wartungsübersicht For maintenance schedule, refer to right side of the chart. After running, clean the chassis and check all moving parts for damage. If any parts are broken or damaged, repair or replace them before the next run. Regular maintenance is necessary to prevent damage to the car and maintain its performance. Um die Wartungsintervalle zu sehen, schauen Sie bitte in die untenstehende Tabelle.
  • Page 19: Wartung Der Reifen

    4 - 1 Chassis Maintenance Entretien du châssis Wartung des Chassis After running, clean the car and lubricate these points. Replace damaged parts, check that all the screws are tight. Reinigen Sie das Chassis nach dem Fahren und schmieren Sie die markierten Stellen.Tauschen Sie beschädigte Teile aus und kontrollieren Sie alle Schrauben auf korrekten Sitz.
  • Page 20: Hauptzahnrad

    4 - 3 Spur Gear Maintenance Entretien de la couronne Hauptzahnrad Adjusting the Slipper Clutch Einstellen des Slippers Réglage de l’embrayage You can adjust the slipper clutch to suit your driving conditions. If the clutch slips too much, tighten the locknut. If the clutch is too tight, loosen the locknut. If the slipper clutch is too tight it may damage the drive train.
  • Page 21 86089 Drive Shaft 6x70mm Getriebewelle 6x70mm Axe de transmission 6x70mm Z260 Z260 B023 Z245 Pin 2.5x12mm Stift 2.5x12mm 86097 E Clip E5mm Goupille 2.5x12mm E-clip E5mm 86089 Circlips 5mm B023 B245 87042 Z260 Spring 4.9x8x7mm Z567 M2.5x12mm Slipper Feder 4.9x8x7mm M3x10mm Ressort 4.9x8x7mm B023...
  • Page 22: Remplacement Du Moteur Et Du Pignon

    4 - 4 Motor and Pinion Gear Maintenance Entretien du moteur et du pignon Motors und Ritzels Screwdriver (NO.2) Kreuzschraubenzieher (Nr.2) Tournevis (N° 2) Allen Wrench Inbusschlüssel Clé Allen Z903 2.5mm Z905 3.0mm Z567 TP. Binder Head Screw M3x10mm Flachkopfschneidschraube M3x10mm Vis tole tête plate M3x10mm Z567 M3x10mm...
  • Page 23 Z903 Z721 M4x4mm 100919 Z721 Set Screw M4x4mm Madenschraube M4x4mm Vis sans tête M4x4mm Z792 Cap Head Screw M4x8mm Inbusschraube M4x8mm Vis tête cylindrique M4x8mm Z792 M4x8mm 100919 Pinion Gear 20 Tooth Ritzel 20 Zaehne Pignon 20 Dents Installation is reverse of removal. Z905 Die Montage erfolgt in umgekehrter Reihenfolge zur Demontage.
  • Page 24: Stoßdämpfer

    4 - 5 Shock Maintenance Entretien des amortisseurs Stoßdämpfer Screwdriver (NO.2) Allen Wrench Z950 Needle Nosed Pliers Kreuzschraubenzieher (Nr.2) Inbusschlüssel Cross Wrench Spitzzange Tournevis (N° 2) Clé Allen Kreuzschlüssel Pinces à becs longs Clé en croix Z903 2.5mm This step same for front and rear. Diese Schritte sind für vorne und hinten identisch durchzuführen.
  • Page 25 Filling Oil Shocks Befüllen der Dämpfer mit Öl Remplissage d’huile des amortisseurs 100961 100961 86955 Shock Oil ( Available separately ) Dämpferöl ( Separat erhältlich ) Huile d’amortisseur ( Disponible séparément ) Use a Rag. 87500 87500 Verwenden Sie einen Standard Setting Putzlappen.
  • Page 26: Wartung Des Differentials

    4 - 6 Diffrential Maintenance Entretien du différentiel Wartung des Differentials This step same for front and rear. Diese Schritte sind für vorne und hinten identisch durchzuführen. Même étape pour l’avant et l’arrière. Screwdriver (NO.2) Kreuzschraubenzieher (Nr.2) Tournevis (N° 2) 85234 Z164 Grease...
  • Page 27 If parts are damaged, repair or replace them according to the instruction below. Wenn Teile beschädigt sind, reparieren oder ersetzen Sie sie wie auf den Zeichnungen erklärt.. Si des pièces sont endommagées, réparez-les ou remplacez-les suivant les instructions ci-dessous. 86032 Z529 M3x15mm Z260...
  • Page 28: Rc-Anlage

    4 - 7 Radio Maintenance Entretien de la radio HPI TF-3 (AM) Transmitter HPI TF-3 (AM) Sender RC-Anlage Émetteur HPI TF-3 (AM) Antenna Battery Level Indicator Steering Dual Rate Antenne Batterie Zustands-Anzeige Lenkeinschlagsbegrenzung Antenne Indicateur du niveau des piles Double débit de direction Good Batteries Batterien sind in Ordnung To be used to adjust steering servo throw.
  • Page 29 Receiver and Servo Empfänger und Servo Récepteur et servo Receiver Connections Anschluss des Empfängers Connexions du récepteur Receiver Switch 100685 Ein/Aus Schalter HPI Flux Tork Interrupteur du récepteur Motor Motor Motor Moteur Moteur 80594 HPI SF-5 Steering Servo Lenkservo Servo de direction If antenna is not positioned correctly, the receiver will have low range or may not function.
  • Page 30 Auto-Lipo setting Deutsch Auto-Lipo is pre-set from factory. P.31 Français If you are using a LiPo battery pack it is mandatory to turn on the Auto-LiPo setting (Low voltage cut-off). This will shut down the ESC when the battery goes below a pre-set voltage to protect your battery from over-discharge and possible damage. The Auto LiPo setting will auto detect if you are using a 2 cell or 3 cell LiPo battery and set the cut-off voltage accordingly.
  • Page 31 Auto-Lipo setting English Auto-Lipo-Modus ist ab Werk eingestellt. P.30 Auto-Lipo pré-réglé en usine. Wenn Sie einen Lipo-Akku verwenden, müssen Sie das Auto-Lipo Programm (Abschalten bei niedriger Spannung) aktivieren. Dieses schaltet den Regler bei einer bestimmten Spannung ab um den Akku gegen Tiefentladung und somit Beschädigungen zu schützen. Das Auto-Lipo Programm erkennt automatisch ob Sie einen 2- oder 3-zelligen Lipo-Akku verwenden und stellt die Abschaltspannung entsprechend ein.
  • Page 32: Übersicht Aller Teile

    Parts Reference Référence des pièces Übersicht aller Teile Metal Parts Pièces métalliques Metall Teile Shown actual size In Originalgröße abgebildet Taille réelle Z663 Z547 Z282 Lock Nut M3 Cap Head Screw M3x20mm Z632 Step Screw M3x14mm Z684 Stoppmutter M3 Inbusschraube M3x20mm TP.
  • Page 33 Metal Parts Pièces métalliques Shown actual size Metall Teile In Originalgröße abgebildet Taille réelle Z243 87042 E Clip E3mm Spring 4.9x8x7mm E-clip E3mm Slipper Feder 4.9x8x7mm B023 Circlips 3mm 86066 Ressort 4.9x8x7mm Ball Bearing 6x13x5mm 86319 Hex Wheel Hub 14mm Kugellager 6x13x5mm Servo Saver Spring 14x5x0.7mm Sechskant-radmitnehmer 14mm...
  • Page 34 Metal Parts Pièces métalliques Shown actual size Metall Teile In Originalgröße abgebildet Taille réelle 86097 Drive Gear 18-23 Tooth Getriebezahnrad 18-23 Zaehne 86098 Couronne 18-23 Dents Idler Gear 29 Tooth 86084 Getriebezahnrad 29 Zaehne Drive Gear 32 Tooth Pignon intermediaire 29 Dents Getriebezahnrad 32 Zaehne Couronne 32 Dents 100905...
  • Page 35 Metal Parts Pièces métalliques Shown actual size Metall Teile In Originalgröße abgebildet Taille réelle 86246 Super Heavy Duty Drive Shaft 11x123mm Super Hd Antriebsknochen 11x123mm Arbre De Transmission Super Renf. 11x123mm 86056 86081 Dogbone 8x84mm Gear Shaft 6x12x78mm Knochen Getriebewelle 6x12x78mm Cardan arriere Axe couronne 6x12x78mm 86057...
  • Page 36 Rubber / Form Parts Pièces en caoutchouc / en mousse Shown actual size Gummi / Schaumstoff Teile In Originalgröße abgebildet Taille réelle 6811 75080 O-ring 6x9.5x2mm (Black) O-ring 7x11x2.0mm (Black) O-ring 6x9.5x2mm (Schwarz) O-ring 7x11x2.0mm (Schwarz) Joint torique 6x9.5x2mm (noir) 100948 Joint torique 7x11x2.0mm (noir) O-ring 14x16x1.0mm (Black)
  • Page 37 Plastic Parts Pièces en plastique Kunststoff Teile 85231 85052 Z150 Antenna Pipe Antennenrohr Tige d'antenne 85059 85236 85239...
  • Page 38 Plastic Parts Pièces en plastique Kunststoff Teile 102272 100908 100948 100961...
  • Page 39 Plastic Parts Pièces en plastique Kunststoff Teile 100949 100909 85245...
  • Page 40: Explosionszeichnung

    Exploded View Vue éclatée Explosionszeichnung Gear Box Assembly (Front) Montage de la boîte de vitesses (Avant) Differentiale (Vorne) 85234 6203 6203 Z663 85058 100961 85234 6123 Z663 86319 85234 Z224 85058 Z303 85058 85059 85234 85058 Z303 100949 Z634 Z569 100961 Z569 85058...
  • Page 41 Gear Box Assembly (Rear) Montage de la boîte de vitesses (Arrière) Differentiale (Hinten) Z581 Z303 Z224 6203 85234 85059 85234 85234 6203 100961 6123 100961 85234 85234 100961 Z634 Z663 Z649 85234 100961 Z547 100949 100949 93535 Z634 86059 Z288 Z634 86074 Z260...
  • Page 42 Transmission Assembly Montage de la transmission Getriebe 75080 Z877 Z529 86248 102246 B085 86827 6811 86827 86827 Z529 86032 86827 86099 86032 87194 Z260 87194 86827 86032 Z260 86827 6811 86032 94512 86827 86032 Z892 86032 86827 86827 100685 86248 86827 86827 B032...
  • Page 43 Chassis Assembly Montage du châssis Chassis Z663 Z150 85239 Z581 100909 85236 94398 85239 100909 85239 80569 Z613 Z581 Z567 Z578 100902 6163 Z567 Z792 Z632 Z792 100909 Z567 Z567 Z567 Z567 Z567 100909 Z613 Z613 Z567 Z632 Z567 85236 Z567 Z567 Z567...
  • Page 44 HEAVY DUTY SPUR GEAR 44 TOOTH 80569 HPI RF-6 RECEIVER WITHOUT CRYSTAL (AM 27MHz/2ch) 102219 1 SAVAGE FLUX HP GT-2 PAINTED BODY (BLACK/GRAY/RED) 80594 HPI SF-5 SERVO (METAL GEAR/8.9kg-cm 6.0V) 102246 1 MACHINED SUPER HEAVY DUTY BEVEL GEAR 43T/13T SET...
  • Page 45 Ersatzteileliste Nummer Anzahl Beschreibung Nummer Anzahl Beschreibung 3192 JANTE BLANCHE CHROME (83x56mm) 100906 1 MOTORHALTER 3.0mm (7075/GRAU/SAVAGE FLUX) 4462 GT2 REIFEN S MISCHUNG (160x86mm) 100907 2 MOTORHALTE STREBE 7x7x80mm (GRAU/SAVAGE FLUX) 6154 KABELBINDER (3.5x150mm/SCHWARZ) 100908 1 AKKUBOX SET (RECHTS/LINKS/SAVAGE FLUX) 6163 DOPPELSEITIGES KLEBEBAND 20x100mm 100909 1...
  • Page 46: Pièces Détachées

    102093 1 COURONNE RENFORCEE 44 DENTS 80569 RECEPTEUR HPI RF-6 sans QUARTZ (AM 27MHz/2ch) 102219 1 CARR PEINTE SAVAGE FLUX HP GT-2 (NOIR/GRIS/ROUGE) 80594 SERVO HPI SF-5 (PIGNON METAL/8.9kg-cm 6.0V) 102246 1 ENS PIGNONS CONIQUES USINES SUPER RENF. 43D/13D 85048...
  • Page 48: Tuningteileliste

    Option Parts List Liste des pièces optionnelles Tuningteileliste 3005 3011 3115 3135 WHITE WHITE WHITE WHITE 3006 3012 3116 3136 BLACK BLACK BLACK BLACK 3007 3013 3117 3139 CHROME CHROME SHINY CHROME MATTE CHROME 3008 3018 3118 3173 GRAY GUNMETAL SATIN CHROME BLACK CHROME 3119...
  • Page 49 100573 80588 100911 100917 102091 CASTLE LINK USB PROGRAMMING KIT ADJUSTABLE STABILITY CONTROL 100912 100918 102095 CASTLE LINK USB PROGRAMMIER SET SYSTEM/DRIFT ASSIST 100913 100920 72127 KIT DE PROGRAMMATION USB CASTLE LINK EINSTELLBARE LENKHILFE/DRIFT 100914 100921 86807 ASSISTENT 100915 102086 72132 SYSTEME CONT.
  • Page 50 A720 86549 85069 85231 1.5mm 12.5 COILS (BLUE 71gF/mm) 1.5mm /4 HOLES BIG BORE ALUMINUM SHOCK SET 86550 87515 SHOCK SPACER PARTS SET 1.5mm 10.5 COILS (SILVER 89gF/mm) 1.4mm / 2 HOLES (ASSEMBLED/SAVAGE) DAEMPFER SPACER SET 86553 85069 1.8mm 12.5 COILS (WHITE 159gF/mm) 1.6mm / 2 HOLES JEU PIÈCES ENTRETOISE AMORTISSEUR BIG BORE ALUMINIUM DAEMPFER SET...
  • Page 51 7184 7186 7188 7194 1969 DODGE CHARGER BODY BOUNTY HUNTER™ 4x4 BODY FORD F-100 BODY NITRO GT-2 TRUCK BODY 1969 DODGE CHARGER KAROSSERIE BOUNTY HUNTER™ 4x4 KAROSSERIE FORD F-100 KAROSSERIE NITRO GT-2 TRUCK KAROSSERIE CARROSSERIE 1969 DODGE CHARGER CARROSSERIE BOUNTY HUNTER™ 4x4 CARROSSERIE FORD F-100 CARROSSERIE CAMION NITRO GT-2 7196...
  • Page 52 HPI Racing USA HPI Japan HPI Europe 70 Icon Street 3-22-20 Takaoka-kita, Naka-ku, 21 William Nadin Way, Swadlincote, Foothill Ranch, CA 92610 USA Hamamatsu, Shizuoka, 433-8119, JAPAN Derbyshire, DE11 0BB, UK (949) 753-1099 053-430-0770 (44) 01283 229400...

This manual is also suitable for:

Savage flux hp brushless system

Table of Contents