Preparing The Remote Commander; Using The Remote Commander; Setting The Clock - Sony XDR-S10HDiP Operating Instructions

•
•
~
AM
I
ANTENNA
I
FM
o
RESET
o
- TUNE + SURROUND
e
RADIOI
BAND
e®
-PRESET+
'f.11
tW
fiID mJ
Tagged SUR SLEEP ALARM
.p,";
POWER
o
A UDID IN o
S0
8 8 8
o
...
CD CD
Sl~~~T
PRESET
c=:) c=:)
...
ENTER HD SCAN TONE
C ) C ) C )
Tag BRIGHT DISPLAY
<=>
C ) C )
MENU SCAN SURRDUND
C ) C ) C )
ALARM SLEEP
C ) C )
~ RADIDI
1810
' - - - - ,
iPod+ and VOLUME + buttons
have a tactile dot.
Size AAA (R031 x 2
Preparing the remote
commander
Installing the batteries into the remote
commander (See Fig.
ml
Insert two size AAA (R03) batteries (not
supplied).
When to replace the batteries
With normal use, the batteries should last for
about six months. When the remote commander
no longer operates the unit, replace all the
batteries with new ones.
Notes
• Do not charge dry batteries.
• When you are not going to use the remote
commander for a long time, remove the
batteries to avoid any damage caused by leakage
and corrosion.
VOLUME
00
The iPod
~II
and VOLUME + buttons have a tactile dot.
Using the remote
commander
Common buttons that appear on both the remote
commander and the unit control the same
functions.
ALARM button
Press to set the alarm to "ON" or "OFF:'
Press and hold for 2 seconds to enter 'l\LARM
TIME SET:'
TONE button
To set the tone directly.
HD SCAN button
The selected band is scanned, and receivable HD
Radio stations are played for 3 seconds in order of
frequency.
SCAN button
The selected band is scanned, and receivable
radio stations are played for 3 seconds in order of
frequency.
BRIGHT button
To adjust the brightness of the display.
Setting the clock
1 Plug in the unit.
The display will flash
''AM 12:00:'
2 Press MENU to show the menu' display.
3 Press SEL • or • to select "TIME SET;'
then press ENTER.
The hour will start to flash in the display.
\ \ I I I I I ;
:::At'l
12~OO
; I I I I I \ \
To change the display to the
daylight saving time
(summer time) indication
1 Press MENU to show the menu display.
2 Press SEL • or • to select
"DST;'
then
press ENTER.
3 Press SEL • or • to select "ON;' then
press ENTER.
"*"
appears and the time indication changes
to summer time.
To deactivate the DST function, select "OFF" in
step
3.
4 Press SEL • or • until current hour
appears in the display, then press ENTER.
The hour is set and the minutes start to flash.
5 Repeat step 4 to set the minute.
Note
If you do not set the menu within 65 seconds, the
setting mode is canceled.