Download Print this page

Troubleshooting; Specifications - Sony XDR-S10HDiP Operating Instructions

Fm/am digital radio
Hide thumbs Also See for XDR-S10HDiP:

Advertisement

Removing the connector cover
Pull up the tab of the connector cover using your
finger.
Notes on radio reception
• Keep away digital music player or mobile phone
from the AM loop antenna or the FM antenna,
as this may lead to interference of reception.
• When you are listening to the radio with an
iPhone connected to the unit. interference with
radio reception may occur.
• When you are listening to the radio while
charging an iPod, interference with radio
reception may occur.
To protect the connector of the unit from dust or.
dirt. you can put the connector cover on.
Using the connector
cover
Attaching the connector cover
Match both claws of the connector cover with the
pits inside of the connector and press the other
side down until
it
clicks.
Insert the cord
while pushing
down the
terminal clamp.
.-;~
Only Insert up
to here.
FM dipole antenna
(supplied)
Connecting the
antenna
4
Make sure the AM loop antenna is
connected firmly by pulling softly.
Adjusting the AM loop antenna
Find a place and an orientation that provide good
reception.
• Do not place the AM loop antenna near the
unit or other AV equipment, as noise may
result.
Adjusting the FM wire antenna
Be sure to fully extend the FM wire antenna, and
keep 4.1 as horizontal and vertical as possible.
FM wire antenna
(supplied)
Adjusting the FM dipole antenna
Be sure to fully extend the FM dipole antenna.
Align the antenna in the shape of a T and place in
a high position on a wall away from this unit.
This unit comes supplied with an FM wire
antenna and FM dipole antenna. Connect
whichever antenna that provides the best
reception to the FM antenna terminal.
To connect the FM antenna
3
Connect the cords to the AM antenna
terminals.
Cord (A) or cord (B) can be connected to
either terminal.
Tip
Adjust the direction of the AM loop antenna for
best AM broadcast sound.
To connect the AM loop
antenna
The shape and the length of the antenna is
designed to receive AM signals. Do not dismantle
or roll up the antenna.
1
Remove only the loop part from the
plastic stand.
2
Set up the AM loop antenna.
Tip
If you have poor FM reception, use a 75
~
coaxial
cable (not supplied) to connect the unit to an
outdoor FM antenna as shown below.
generation
fi
iPod5th
generation (video)
0.1 MHz
10kHz
Channel step
generation
(aluminium)
~
@J
iPod nano 2nd
iPod 4th generation
(color display)
generation
D
[i]
~
©
@J
iPod nano 3rd
generation (video)
iPod touch
iPoddassic
D
iPhone
8.
~ ~
iPod4th
Band
Frequency
AM
530 - I 710 kHz
FM
87.5 - 108 MHz
Time displa,
12-hour system
Frequenc, range
The iPod models that are compatible with iTunes
Tagging are as follows:
• iPod nano 3
rd
generation
• iPod classic
• iPod 5
th
generation
... The models above may vary without notice. For
the latest information. check the website of
Apple Inc.
Notes
• In these Operating Instructions, "iPod" is used
as a general reference for the iPod functions on
the iPod and iPhone, unless otherwise specified
by the text or illustrations.
• nunes Tagging requires iTunes 7.4 or later.
Speaker
Approx. 6.6 em (2 5/8 inches) dia. 8
n
Input
AUDiO IN jack (0 3.5 mm stereo minijack)
Antenna terminal
75
n
antenna terminal for FM
Antenna terminal for AM
Audio power specifications
POWER OUTPUT AND TOTAL HARMONIC
DiSTORTION
With 8-ohm loads. both channels driven from
150-10,000 kHz; rated 3W per channel-minimum
RMS, with no more than 10% total harmonic
distortion.
Power output
4 W
+
4 W (maximum power)
Power requirements
120 V AC, 60 Hz
Dimensions
Approx. 330 X 130 X 135 mm (w/h/d)
(13 X 5
1/,
X 5
3/ 8
inches) not incl. projecting
parts and controls
Mass
Approx. 3.1 kg (61b 13.3 oz) incl. power supply
unit
~
i Podmini
Specifications
Compatible iPod models
The compatible iPod models are as follows.
Update your iPod to use the latest software before
you use it.
Supplied accessories
Remote commander (1)
FM wire antenna (1)
FM dipole antenna (I)
AM loop antenna (I)
Audio connecting cable (1)
Universal dock adapter for iPhone (I)
Connector cover (1)
Design and specifications are subject to· change
without notice.
Features
• 'FMI AM Digital Radio .with HD Radio
technology and iPod
I
iPhone compatibility
• iTunes Tagging capability. enabling the user to
save song information with the touch of a
button while listening to an HD Radio station.
• Large LCD displays HD Radio information
• Stereo speakers with surround sound function
• Fully adjustable tone control for fUle tuning of
bass and treble
• Supplied remote commander
Should any problem persist after you have made
the following checks, consult your nearest Sony
dealer.
Abroadcast Is received In en.log onl,. even
though the .... Is within HD R.dlo
reception.
• Depending on the conditions, if the incoming
signal strength 1s too weak or unstable. the HD
indicator will not flash or light up. In that case,
the HD Radio broadcast will be received as an
analog signal.
The ..clIo or lPod .I.rm Is .ctIveted but no
sound comes on.t the preset .I.rm time.
• Has
VOLUME
been adjusted?
There Is no sound from the IPod.
• Make sure the iPod is securely connected.
• Adjust the
VOLUME.
The IPod cannot
be
oper.ted with this unit.
• Make sure the iPod is securely connected.
The IPod cannot
be
ch.rged.
• Make sure the iPod is securely connected.
MCANNOT DETECT
R
.P...... In the dlspl.,
when connecting .n IPod.
• Disconnect the iPod once and then reconnect it
securely.
• Play the unit on the power source specified in
"Specifications".
• To disconnect the AC power cord (mains lead),
pull it out by the plug. not the cord.
• The unit is not disconnected from the mains as
long as it is connected to the AC outlet, even if
the unit itself has been turned off.
• The dating code and the nameplate are located
on the bottom exterior of the unit.
• Since a strong magnet is used for the speaker.
keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to
prevent possible damage from the magnet.
• Do not leave the unit in a locatjon near a heat
source such as a radiator or airduct. or in a
place subject to direct sulllight, excessive dust.
mechanical vibration, or shock.
• Allow adequate air circulation to prevent
internal heat build-up. Do not place the unit on
a surface (a rug, a blanket. etc.) or near
materials (a curtain) which might block the
ventilation holes.
• Should any solid object or liquid fall into the unit.
unplug the unit and have it checked by a qualified
personnel before operating it any further.
• To clean the casing. use a soft cloth dampened
with a mild detergent solution.
• Never touch the wire of the external FM
antenna during a thunderstorm. Furthermore.
immediately disconnect the AC power cord
from the radio.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
Precautions
What is iTunes Taggingl
The iTunes Tag bulton on the new XDR-SIOHDiP
allows you to tag songs yuu like that are broadcast by
HD Radio stations. Information about these tagged
songs is stored by the receiver and transferred to
your iPod When you connect your
iPod
to your
computer. iTunes automatically presents the songs in
a new Tagged playlist so you can preview. buy. and
download them. iTunes Tagging is a great
way
to
discover new music add it to your collection!
Troubleshooting

Advertisement

loading