Chapter 3 Setup Menu Overview - EverFocus ED2250S/P Owner's Instructions Manual

5. [Figure 5] Match the
BRKT-ANCHOR and CAMERA
ADAPTER and use 4screws
(PH M4 x 8) to assemble them.
6. [Figure 6] Match the 3 holes on
the back of the CAMERA and the
CONNECTOR and turn it left
about 15 degrees.
(Check the sound of LOCKING
and that the LEVER-LOCKING
is in place)
* Use the screws (BH M3 x L8) to
connect the CAMERA and the
ADAPTER so they don't move.
7. [Figure 7] Assemble the
COVER-DOME onto the DOME.
2-9
[Figure 5]
CAMERA ADAPTER
In this chapter, we will look over the Setup Menu of the ED2250S/P,
First we'll look over the overall structure of the Setup Menu, and then
we'll look at the functions of each menu.
[Figure 6]
15 °
[Figure 7]

Chapter 3 Setup Menu Overview

E
3-1