Send And Receive Test - SMC Networks EtherPower II 1000 User Manual

C
ONFIGURING AND

Send and Receive Test

This test verifies that the network cable is connected correctly, so
that the network card can transmit and receive data.
The test requires two computers with the EtherPower II 1000
network card installed. One computer is configured in Send mode
to generate and send test messages. The other computer is
configured in Receive mode to receive the test messages and
transmit them back to the sender.
Note: You should run the Local Tests before running the Send
and Receive Test to ensure that the card's basic functions
are working properly.
To run the test, simply click on the "Send" button on one
computer and on the "Receive" button on the other. You can
view the test results by clicking on the "View Test Results"
button.
3-10
T N
ESTING THE ETWORK
C
ARD