Buderus Logano G201 Operating Instructions Manual page 19

Cleaning the flue gas header
The flue gas header [2] is cleaned via the inspection aper-
ture. The inspection aperture is on the bottom of the flue
gas header and is sealed with the cleaning cover [1].
V Unscrew the two wing nuts on the cleaning cover.
V Carefully remove the cleaning cover [1].
V Remove the combustion residues via the inspection
aperture.
V Close the inspection aperture with the cleaning cover
[1]. Check that the seal is seated correctly.
V Screw the cleaning cover [1] back on with two wing
nuts.
Logano G201 - Subject to technical modifications.
Cleaning and maintenance
Fig. 16 Cleaning the flue gas header
1 Cleaning cover
2 Flue gas header
5
19