Table of Contents
Advertisement
F.
SCREW
1
Installing the Chassis into a Rack
1.
Extend the outer rails as illustrated above.
2.
Align the inner rails of the chassis with the outer rails on the rack.
3.
Slide the inner rails into the outer rails, keeping the pressure even on both
sides. When the chassis has been pushed completely into the rack, it should
click into the locked position.
SCREW
screw the handles the
4.
Optional screws may be used to secure the to hold the front of the chassis to
outer rails for secure
the rack.
purpose if necessary
Figure 6-4: Installing the Chassis into the Rack
Chapter 6: Rack Installation
COMPLETE
6-7
ABLECOM
DATE:2008/08/14
REV:2
Advertisement
Table of Contents
