Table of Contents
Advertisement
sure that the chassis covers are installed. Finally, verify that the heatsinks are
installed properly. This LED will remain flashing or on as long as the overheat
condition exists.
•
NIC2:
Indicates network activity on GLAN2 when flashing.
•
NIC1:
Indicates network activity on GLAN1 when flashing.
•
HDD:
Indicates IDE channel activity in the SAS/SATA drive, SCSI drive, and/
or DVD-ROM drive activity when flashing.
•
Power:
Indicates power is being supplied to the system's power supply units.
This LED should normally be illuminated when the system is operating.
Chapter 4: System Interface
4-3
Advertisement
Table of Contents
