Lenovo THINKSERVER RS210 Hardware Maintenance Manual page 52

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See Chapter 7, "Parts listing, RS210 Types 6531, 6532, 6533, and 6534," on page 177 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Hostname set to %1 by user %2.
(%1 = CIM_DNSProtocolEndpoint.
Hostname;
%2 = user ID)
IP address of network interface
modified from %1 to %2 by user %3.
(%1 = CIM_IPProtocolEndpoint.
IPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.
IPAddress;
%3 = user ID)
IP subnet mask of network interface
modified from %1 to %2 by user
%3s.
(%1 = CIM_IPProtocolEndpoint.
SubnetMask;
%2 =
CIM_StaticIPAssignmentSettingData.
SubnetMask;
%3 = user ID)
IP address of default gateway
modified from %1 to %2 by user
%3s.
(%1 = CIM_IPProtocolEndpoint.
GatewayIPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.
DefaultGatewayAddress;
%3 = user ID)
OS Watchdog response %1 by %2.
(%1 = Enabled or Disabled; %2 =
user ID)
DHCP[%1] failure, no IP address
assigned.
(%1 = IP address, xxx.xxx.xxx.xxx)
Remote Login Successful. Login ID:
%1 from %2 at IP address %3.
(%1 = user ID; %2 =
ValueMap(CIM_ProtocolEndpoint.
ProtocolIFType; %3 = IP address,
xxx.xxx.xxx.xxx)
44
ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual
Info A user has modified the host
name of the IMM.
Info A user has modified the IP
address of the IMM.
Info A user has modified the IP
subnet mask of the IMM.
Info A user has modified the
default gateway IP address
of the IMM.
Info A user has enabled or
disabled an OS Watchdog.
Info A DHCP server has failed to
assign an IP address to the
IMM.
Info A user has successfully
logged in to the IMM.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
1. Make sure that the network
cable is connected.
2. Make sure that there is a
DHCP server on the network
that can assign an IP address
to the IMM.
No action; information only.