Removing And Installing The Bezel - Lenovo THINKSERVER RS210 Hardware Maintenance Manual

Removing and installing the bezel

To remove the bezel, complete the following steps:
1. Remove the server from the rack and remove the cover (see "Removing and installing the cover" on
page 119).
2. From inside the server, press the bezel release latch 1 toward the left side of the server.
3. Pivot the bezel 2 forward and pull it away from the server.
4. If you are instructed to return the bezel, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
120
ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual