Download Print this page

Siemens optiPoint 400 standard SIP Installation And Startup page 9

Advertisement

A31003-A2056-C202-52-76D1
Stay in the "network" menu and enter an IP address for the tele-
phone and for the subnet mask:
Network:
01=DHCP IP assign?
Network:
d ddddddddd
02=Terminal-IP addr.? ddddd>
Terminal-IP
addr.ddd
Change?
dddddddddddddddddd
Press the asterisk key (*) on your key pad to move be-
tween the separation points for the IP address.
Terminal-IP addr.
000.000.000.000
Terminal-IP addr.
19.3.35.112
Network:
d ddddd
02=Terminal-IP addr.? ddddd>
Repeat these steps for the menu choice "03=Terminal mask"
to enter the corresponding mask IP address.
After changing IP addresses, you will be prompted to re-
start the phone. The change will otherwise not become
effective.
Off
>
0.0.0.0
0.0.0.0
>
19.3.35.112
Installation and Startup
Change to
"Terminal IP addr."
and
Confirm
Confirm
Enter new IP address
and
Confirm
Entered IP address is
shown
Back to Basic menu
9

Advertisement

loading