Advertisement
Quick Links
Advertisement
Related Manuals for Siemens optiPoint 400 standard SIP
Summary of Contents for Siemens optiPoint 400 standard SIP
- Page 1 SiP-Phone optiPoint 400 standard SIP V2.0 Installation and Startup...
- Page 2 – If the optiPoint 400 standard SIP is supplied with power over the LAN interface, the power source must be a limited power source PowerHub compliant with IEC 60950.
-
Page 3: Preparing The Telephone
Installation and Startup This guide for Installation and Startup describes how to connect the components of the optiPoint 400 standard SIP telephone and how to integrate the telephone into a LAN environment. Administrators will find more detailed information in the “Adminis- trator Manual”. - Page 4 Installation and Startup Housing elements and connections on the bottom of the telephone: Connector for a local power supply unit (optional) Strain relief 10/100 Mbit/s Ethernet port for LAN connection, autonegotiating (optionally including power supply) 10/100 Mbit/s Ethernet port for optional connecting of a PC/work- station, autonegotiating Handset connector The two cable ends of the handset cord are equipped...
-
Page 5: Integrating The Telephone Into The Communication Environment
SIP server. Otherwise it is only reachable via IP address. If the optiPoint 400 standard SIP is used in an environment with an integrated DHCP server, the telephone unit will automatically get an IP address from it when you connect the DHCP server to the LAN for the first time. - Page 6 Installation and Startup Setting up the telephone in a LAN environment with DHCP server The DHCP server can assign to the telephone a Ter- minal IP Address, a Terminal Mask, a Default Route, a SNTP IP Address, and a Timezone Offset. The telephone is shipped in the default 'Server' mode, and you are required to enter a SIP server IP address for the telephone to register with the SIP...
- Page 7 Installation and Startup System: Confirm 01=Terminal Number? > Enter the telephone Terminal Number number assigned to this > telephone set and Terminal Number Confirm 1289 > Following the entry of your own telephone number and the config- uration of the SIP Server/SIP Gateway related parameter, the telephone changes over to its normal operating mode (Basic menu).
- Page 8 Installation and Startup Setting up the telephone in a LAN environment without DHCP server If there is no DHCP server integrated into your environment, you have to enter the IP address and the subnet mask manually via your dialling keypad. First you have to switch off the DHCP function.
- Page 9 Installation and Startup Stay in the "network" menu and enter an IP address for the tele- phone and for the subnet mask: Change to Network: 01=DHCP IP assign? > "Terminal IP addr." Network: d ddddddddd 0.0.0.0 Confirm 02=Terminal-IP addr.? ddddd> Terminal-IP addr.ddd 0.0.0.0...
- Page 10 Installation and Startup Assigning a telephone number (E.164) After restarting your telephone you have to assign a telephone number to your optiPoint 400 standard SIP. The following display is shown: Change to "Service" 13:05PM bbbbbbbbbbb 07.02.01 No E164 address set >...
- Page 11 Installation and Startup Setting date and time If no SNTP server is accessible in your network environment, you have to set manually the time and date of your telephone: Change to "Service" 13:15PM 07.02.01 1289b > Confirm Change to "Configuration" Service: 2=Configuration? >...
- Page 12 Installation and Startup Setting language for operator prompting You can define your language for the display text of the telephone: Change to "Service" 13:15PM 07.02.01 1289b > Call menu Change to "Configuration" Service: 2=Configuration? > Call menu Change to "Language" Configuration: 01=Country options? >...
- Page 13 Reference No.: A31003-A2056-C202-52-76D1 Printed in the Federal Republic of Germany © Siemens AG 2002 Information and Communication Networks Hofmannstrasse 51 D-81359 München, Germany...