Lenovo ThinkCentre 7244 Hardware Maintenance Manual page 127

5. Place the heat sink and fan assembly on its side so that the thermal grease does not come in contact
with anything.
6. Remove the hard disk drive. See "Replacing the hard disk drive" on page 122.
7. Lift the small handle
Figure 53. Accessing the microprocessor
8. Lift the microprocessor straight up and out of the socket.
Notes:
a. Your microprocessor and socket might look different from the one illustrated.
b. Note the orientation of the microprocessor in the socket. You can either look for the small triangle
on one corner of the microprocessor or note the orientation of the notches
This is important when installing the new microprocessor on the system board.
c. Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom.
d. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
.
Chapter 9 Replacing FRUs (Machine Types: 3379, 4083, 4088, 4099, 4138, 5897, 6137, 6234, 6258, 6303, 7174, 7220,
3 and open the retainer
7346, 7354, 7357, 7360, 7483, 7582, 7627, 7630, 7638, 8910, and 9964.)
1 to access the microprocessor 2 .
1
2 on the microprocessor.
119