Replacing Rear Light Supporting Panel (Octavia Estate) - Skoda Otavia Workshop Manual

53
3 ¢ 3 . 3
------------ -------------
Rear Body
Replacing rear light supporting
panel (Octavia Estate)
G End panel already cut out.
Note:
The rear light supporting panel can only be re-
placed in connection with water channel part
section.
Separation points
K - Detach original joint for side part.
K - Separate water channel.
Notes:
♦ Place separation cut at least 30 mm above
bolted connection for tailgate stop.
♦ Do not damage side part and inner side when
separating water channel.
♦ First of all separate roughly the connection
from water channel to side part and then
separate from the inside with rod grinder the
area situated below the side part.
- Detach remaining original joint
Replacement parts
♦ Rear light supporting panel
♦ Water channel
♦ Seal 1 U6 809 875
Preparing new part
- Transfer separation cut to water channel and
cut to shape.
OCTAVIA
Edition 02.03
S00.5119.56.20