50
------------ 50-2 -------------
Front Body
Replacing top longitudinal member
Separation points
K -
Make the separation cut according to the
severity of the damage.
-
Release original welding at the top and bot-
tom by drilling off the spot weld seams.
Replacement part
♦ Top longitudinal member
Preparing new part
-
Transfer the separation cut onto the new part
and cut to the required dimensions.
Welding in
K -
Weld top longitudinal member, RP spot
seam.
-
Butt weld the separation cut as an inert gas
shielded full seam.
OCTAVIA
Edition 04.04
S00.5119.58.20