Radio - JVC KD-X320BT Instruction Manual

RADIO

"ST" lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1 Press repeatedly to select FM or AM.
2 Press to search for a station automatically.
(or)
Press and hold until "M" flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press
2
Turn the volume knob to select a preset number, then press the
knob to confirm.
Other settings
1 Press and hold
2 Turn the volume knob to select [TUNER], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5
Press to exit.
To return to the previous setting item, press
RADIO TIMER Turns on the radio at a specific time regardless of the current source.
1 ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be turned
on.
2 FM/ AM: Select the source.
3 01 to 18 (for FM)/ 01 to 06 (for AM): Select the preset station.
4 Set the activation day *
"M" lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM] in [SRC SELECT] after Radio Timer for AM is
selected. ( 4)
SSM SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to
18 stations for FM. "SSM" stops flashing when the first 6 stations are stored.
Select SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
* 1
Selectable only when [ONCE] or [WEEKLY] is selected in step
.
.
1
and time.
1
.
ENGLISH
Default: XX
7