1140 CRT board assembly (with cable)
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 59
•
"1020 Bottom door" on page 60
•
"1030 Hard disk drive (HDD)" on page 62
•
"1070 Keyboard" on page 68
• "1080 Palm rest assembly, power-on board assembly (with cable), and microphone" on page 71
• "1120 System board, fan assembly, and backup battery" on page 77
•
"1130 LCD unit" on page 83
Table 24. Removal steps of CRT board assembly (with cable)
When installing:
Make sure that the connectors are attached firmly.
Step
Screw (quantity)
1
M2 × 4 mm, wafer-head, nylon-coated (1)
1150 DC-in cable and base cover assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 59
•
"1020 Bottom door" on page 60
•
"1030 Hard disk drive (HDD)" on page 62
•
"1070 Keyboard" on page 68
• "1080 Palm rest assembly, power-on board assembly (with cable), and microphone" on page 71
• "1120 System board, fan assembly, and backup battery" on page 77
Torque
Color
Silver
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
85