Table of Contents
Advertisement
Exit: Exit VoIP Device Remote Config.
After you click the Config button, you will see the following window.
There are 3 ways to setup the IP address: DHCP, PPPoE, and Static IP. Select your Network
settings. These are the most common setup:
For LAN, please choose Static IP
For xDSL, please chose PPPoE
For cable internet, please choose DHCP
For other Network setup, please consult your Network Administrator.
Before you can save these settings, the TA will ask you to enter the password on the Remote
Password field.
Remote Password: Default password is "1234". After you enter the correct password, you may
select "Default Setting", "Reboot" or "Save".
Web Setting: Link user directly to the web setting interface.
Default setting: Restore to factory default settings.
Reboot: Restart the system.
Save: Save any changes and restart the system.
Status: Displays the device's current status (Idle, Rebooting etc).
Return: Return to the "Device List" window.
8
Advertisement
Table of Contents
