Table of Contents
Advertisement
5. Telnet
Telnet configuration is designed for advanced users, Network Administrators or System Engineers. Any
improper use will affect the performance of the terminal adapter.
TA reserves port 4748 for telnet use only.
At command prompt type in <telnet IP address> : 4649. For example, telnet 63.81.83.173:4649 then
press [Enter]. System will ask user to input username and password (default username and password
is admin)
These are available commands for Telnet configuration:
config {<adm>|<net>|<dialplan>|<sip>|<voice>|<tel>|<mis>}
quit
reboot
show
write
xdef
portstatus
logout
For network administrator configuration:
config adm
exit
name
pw
sntp
tz
ver
uyear
umonth
uday
uhour
uminute
usecond
tscheck
syslog
snmp
Quit the shell
Reboot the system
Show the setup info. Same as "?"
Write the data which have been modified
Restore to default values manufacturer
Port status log
Shell logout
Exit to previous folder
Gateway name
Password for gateway
Setup SNTP IP
Time zone configuration
Firmware Version
Set year
Set month
Set day
Set hour
Set minute
Set seconds
Time server check
System log server
SNMP server
30
Advertisement
Table of Contents
