Installing The Driver Locally - Samsung CLP-36x Series User Manual

Installing the driver locally

A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine's driver (see
Advanced Guide).
• If you are a Macintosh or Linux operating systems user, refer to the
"Installation for Macintosh" on page 90
92.
• The installation window in this
machine and interface in use.
• Only use a USB cable no longer than 3 meters (118 inches).
12
Windows
1 Make sure that the machine is connected to your computer and
powered on.
If the "Found New Hardware Wizard" appears during the installation
procedure, click Cancel to close the window.
2 Insert the supplied software CD into your CD-ROM drive.
The software CD should automatically run and an installation window
will appear.
or "Installation for Linux" on page
User's Guide may differ depending on the
3 Select Install Now.
4 Follow the instructions in the installation window.
You can select the software applications in the Select Software to Install
Window.
22
1. Introduction