Samsung CLP-36x Series User Manual page 120

Wireless network setup
When the wireless network settings are completed, disconnect the USB
13
cable between the computer and machine.
Wireless network set up is completed. After the installation is finished,
14
click Quit.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see
on page 90).
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad hoc wireless network by
following these simple directions.
Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• USB cable
Creating the ad hoc network in Macintosh
"Installation for Macintosh"
10
11
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer and the wireless network machine.
Insert the supplied software CD into your CD-ROM drive.
3
Double-click the CD-ROM icon that appears on your Macintosh desktop.
4
5 Double-click the MAC_Installer folder > Installer OS X icon.
6 Click Continue.
7 Read the license agreement and click Continue.
8 Click Agree to agree to the license agreement.
9 When the message that warns that all applications will close on your
computer appears, click Continue.
Click Wireless Network Setting button on the User Options Pane.
After searching the wireless networks, a list of wireless networks your
machine has searched appears. Click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID name (SSID is case-
sensitive).
• Operation Mode: Select ad hoc.
2. Using a network-connected machine
120