Page 4
SAMSUNG WORLDWIDE ONTACT If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country Customer Care Center ARGENTINE 0800-333-3733 AUSTRALIA 1300 362 603 AUSTRIA 0800-SAMSUNG (726-7864) BELGIUM 0032 (0)2 201 24 18 BRAZIL 0800-124-421...
Understanding the Control Panel ... 1.4 LEDs ... 1.4 Stop button ... 1.4 2. Software overview Supplied software ... 2.1 Printer driver features ... 2.1 System requirements ... 2.2 3. Getting Started Setting up the hardware ... 3.1 Setting up the network ... 3.1 Supported operating systems ...
Page 6
Accessories ... 8.1 How to purchase ... 8.1 9. Installing accessories Precautions to take when installing accessories ... 9.1 Installing a memory module ... 9.1 Activating the added memory in the PS printer properties ... 9.2 10. Specifications 11. Glossary Index...
To access a printer driver help screen, click Help from the printer properties dialog box. If you have Internet access, you can get help, support, printer drivers, manuals, and order information from the Samsung website, www.samsungprinter.com.
Environmental and Safety Consideration Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is certified as a Class I laser product conforming to the requirements of IEC 825.
However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, please contact your nearest Samsung dealer. Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.
Page 10
A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative. Replacing the Fitted Plug (for UK Only) Important The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse.
Introduction Congratulations on the purchase of your printer. This chapter includes: • Special features • Machine overview • Control panel overview • Understanding the Control Panel Note Some features are optional. Please check the specifications sections. (See "Specifications" on page 10.1.) Special features Your new machine is equipped with special features.
These are the main components of your machine. • The figure above shows your machine with the available accessories. (See page 8.1 for more information) • The symbol denotes an optional device. top cover output tray(face down) control panel control board cover handle tray 1 optional tray...
toner colors: Show the status of each toner cartridge. See Status LED with the toner cartridge messages on page 1.4. Status: Shows the status of your machine. (See "Understanding the Control Panel" on page 1.4 for more information.) Stop: Stops an operation at any time and there are more functions. (See "Understanding the Control Panel" on page 1.4 for more information.) Control panel overview <Introduction>...
LEDs The color of the Status and toner colors LED indicates the machine's current status. Status LED toner colors LED lights green All LEDs off slowly blinks green All LEDs off fast blinks green All LEDs off lights red All LEDs off lights green each LED blinks red blinks red...
• Paper source selection • Paper size, orientation and media type • Number of copies In addition, you can use various special printing features. The following table shows a general overview of features supported by your printer drivers: Printer driver Feature...
PostScript driver Feature Windows Color mode Machine quality option Poster printing Multiple pages per sheet (N-up) Fit to page printing Scale printing Watermark Overlay System requirements Before you begin, ensure that your system meets the following requirements: Windows Your machine supports the following Windows operating systems. Requirement (recommended) Windows Pentium II 400 MHz...
Setting up the network You need to set up the network protocols on the machine to use it as your network printer. Note • If you want to use the USB cable, connect the cable between a computer and you machine.
Double click Application > SetIP. Open the language folder you want to use. Double click Setup.exe to install this program. From the Windows Start menu, select Programs > Samsung Network Printer Utilities > SetIP. Select the name of your printer and click "...
Next. The list of machines available on the network appears. Select the printer you want to install from the list and then click Next. • If you do not see your machine on the list, click Update to refresh the list, or select Add TCP/IP Port to add your machine to the network.
After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung machines in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish.
This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control. • Before purchasing large quantities of print media, ensure that it meets the requirements specified in this user’s guide.
Maximum capacity may differ depending on media weight, thickness, and environmental conditions. c. Smoothness: 100 to 250 (sheffield) d. Recommended media: Transparency for a color laser printer by 3M such as PP2500. Dimensions 216 x 279 mm (8.5 x 11 inches) •...
• Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the printer’s fusing temperature for 0.1 second. Check your machine’s specification to view the fusing temperature, see page 10.1. • Letterhead ink must be non-flammable and should not adversely affect printer rollers.
Verifying the output location The machine has the output tray that collects paper face-down, in correct order. Note • If you continuously print many pages, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away from the surface.
Squeeze the paper length guide and slide in it until it lightly touches the end of the paper stack. Close the paper cover. Slide the tray back into the machine until it clicks. Note After you load paper, you need to set up your machine for the paper type, size, and source you loaded.
Page 27
To change the tray size to other size, you must adjust the paper length guide properly. Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary. Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually.
Close the paper cover. Slide the tray back into the machine until it clicks. Note If you adjusted the tray itself to use paper shorter than 222mm (8.74 inches), you may not see the tray from outside of the machine, double-check the tray is installed. Using manual feed mode If you select Manual Feeder in the Source option, you can manually load paper in the tray.
Printing on labels • Only use labels recommended for your machine. • Verify that the labels’ adhesive material can tolerate a fusing temperature of 180 °C (356 °F) for 0.1 seconds. • Make sure that there is no exposed adhesive material between the labels.
Printing on preprinted paper • Preprinted paper is paper that has some type of printing on it before it is sent through the machine (paper that has a preprinted logo at the top of the page, for example). • Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine’s fusing temperature of 180 °C (356 °F) for 0.1 seconds.
Click the Start button on the computer screen. Select Printers and Other Hardwares. Select Printers and Faxes. Right-click on the printer driver icon and select Printing Preferences. Click the Paper tab, and change the settings on Paper Options. Click OK.
For Windows XP/2003, select Printers and Faxes. For Windows Vista, select Control Panel ➞ Printers. Double-click the Samsung CLP-350 Series icon. (Or Samsung CLP-350 Series PS) From the Document menu, select Cancel. Note You can also access this window by simply double-clicking the printer icon at the bottom right corner of the Windows desktop.
Maintenance This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • Printing a machine configuration report • Cleaning your machine • Maintaining the cartridge • Redistributing toner • Replacing the toner cartridge • Replacing the Imaging Unit •...
Page 34
Extend the top handle on the imaging unit and then use it to pull the imaging unit out of the machine completely. Caution • Do not touch the green surface on the imaging unit with your hands or any other material. Use the handle on it in order to avoid touching this area.
4,000 pages for black and white printing and 2,000 pages for each color printing. However, the print cartridge that is shipped with the printer prints 3,000 pages for black and white,1,500 pages for colors. Redistributing toner When a print cartridge is low on toner, faded or light areas may appear.
Grasp the toner cartridge and align it with the corresponding slot inside the machine. Insert it back into its slot until it clicks into place, and rotate the toner cartridge clockwise. Note If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water.
4,000 pages for black and white printing and 2,000 pages for color printing. However, the print cartridge that is shipped with the printer prints 3,000 pages for black and white, 1,500 pages for colors. Replacing the Imaging Unit The life of the imaging unit is approximately 20,000 pages for black or 46,000 images for printing.
Page 38
Pull the imaging unit out of the machine using the handle on its bottom. Extend the top handle on the imaging unit and then use it to pull the imaging unit out of the machine completely. Take a new imaging unit out of its package. Remove the protective devices on both sides of the imaging unit and the paper protecting the surface of the imaging unit.
Caution If the front cover is not completely closed, the machine will not operate. Please make sure all toner cartridges are installed properly. If any toner cartridge is installed improperly, the front cover do not close. 11 Turn the machine on. Caution If there is a cracking sound, re-install the...
If you have connected your machine to a network and set up TCP/IP network parameters correctly, you can manage the machine via Samsung’s SyncThru™ Web Service, an embedded web server. Use SyncThru™ Web Service to: • View the device information and check its current status.
In the tray 1 Pull the tray out of the printer and remove the jammed paper. If you cannot find the jammed paper, go to the next step. To remove the jammed paper, open the rear cover.
Page 42
Close the rear cover and then open the top cover. Holding the inner cover open, carefully take the jammed paper out of the printer. Be cautious of the paper exit area as it can be hot. The inner cover will then close automatically.
In the optional tray If paper is jammed in the optional Tray, follow the next steps to release the jammed paper. Pull the optional tray out of the machine. Remove the jammed paper from the machine. Insert the optional tray into the machine until it snaps into place. Open and then close the rear cover or front cover to resume printing.
If a system error occurs, contact your service representative. The connection cable between the computer and the machine is not connected properly. The printer may be in manual feed mode and out of paper. The connection cable between the computer and the machine is defective.
Page 45
Paper tab within from the the printer properties. Select wrong the correct paper source. paper See the printer driver help source. screen. A print job The job may be very Reduce the complexity of the is extremely complex.
Try a different kind or brand of paper. • Change the printer option and try again. Go to printer properties, click Paper tab, and set paper type to Thick. Refer to the Software Section for details.
Page 47
Printing on seams can cause problems. • If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or in printer properties. • If characters are improperly formed and Misformed producing hollow images, the paper stock characters may be too slick.
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. • Change the printer option and try again. Go to printer properties, click Paper tab, and set paper type to Thin. Refer to the Software Section for details.
Reader. with the one in Acrobat Reader. Possible Cause and Solution • Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list.
The machine does not It is a known problem that occurs when a print whole pages and color printer is used on version 8.51 or its output is half page earlier of Ghostscript, 64-bit Linux OS, and printed.
Memory module Optional tray 2 Part number To order Samsung-authorized supplies or accessories, contact your local Samsung dealer or the retailer where you purchased your machine, or visit www.samsungprinter.com information on calling for technical support. <Ordering supplies and accessories> Accessories...
Installing accessories Your machine is a full-featured model that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several accessories available to enhance your machine’s capabilities. This chapter includes: •...
Activating the added memory in the PS printer properties After installing the memory module, you need to select it in the printer properties of the PostScript printer driver in order to use it. Make sure that the PostScript printer driver is installed on your computer.
20 to 80% RH 128 MB (expandable up to 256 MB) 45 scalable, 1 bitmap and 136 PS USB 2.0 Ethernet 10/100 Base TX Windows 2000/ SPL-C (Samsung Printer 2003/ XP/ Vista Language Color) driver, PCL6, PostScript driver Various Linux PostScript driver Mac 10.3 ~ 10.4...
Fuser Unit This is the part of a laser printer that melts the toner onto the print media. It consists of two hot rollers. After toner is transferred onto the paper, the fuser unit applies heat and pressure to ensure that the toner stays on the paper permanently, which is why paper is warm when it comes out of a laser printer.
Page 56
Internet and most commercial networks run. toner cartridge It is a kind of bottle within a machine like a printer which contains toner. Toner is a powder used in laser printers and photocopiers which forms the text and images on the printed paper.
7.9 power receptacle 1.2 power switch 1.2 preprinted paper, print 4.9 print media guidelines 4.1 selecting print media 4.1 specification 4.2 Printer software CD 2.1 printing 5.1 problem solving 7.4 problems Linux 7.9 Macintosh 7.10 paper feeder 7.4 PostScript 7.9 printing 7.4...
Page 59
Installing Software for Local Printing ... 4 Installing Software for Network Printing ... 7 Reinstalling Printer Software ... 10 Removing Printer Software ... 11 Installing mono printer driver ... 11 ASIC Chapter 2: Printing a Document ... 12 Printing to a file (PRN) ... 13 Printer Settings ...
Page 60
SING MART Chapter 6: Understanding Smart Panel ... 25 Opening the Troubleshooting Guide ... 26 Using Printer Settings Utility ... 26 Using Onscreen Help File ... 26 Changing the Smart Panel Program Settings ... 26 SING RINTER IN Chapter 7: Getting Started ...
Page 61
SING RINTER WITH A Chapter 8: Installing Software ... 32 Printer driver ... 32 Setting Up the Printer ... 33 For a Network-connected ... 33 For a USB-connected ... 33 Printing ... 34 Printing a Document ... 34 Changing Printer Settings ... 34 Printing Multiple Pages on One Sheet of Paper ...
Installing Software for Local Printing A local printer is a printer directly attached to your computer using the printer cable supplied with your printer, such as a USB or parallel cable. If your printer is attached to a network, skip this step and go to “Installing Software for Network Printing”...
If the test page prints out correctly, click Yes. If not, click No to reprint it. To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site.
Page 64
If the test page prints out correctly, click Yes. If not, click No to reprint it. To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site.
Select the printer you want to install from the list and then click Next. • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
Page 66
Samsung. If you so desire, select the corresponding checkbox(es) and click Finish. Otherwise, just click Finish. : After setup is complete, if your printer driver doesn’t work properly, reinstall the printer driver. See “Reinstalling Printer Software” on page 10. Custom Installation You can choose individual components to install and set a specific IP address.
Page 67
Select the printer you want to install from the list and then click Next. • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
Select the printer you want to install from the list and then click Next. • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
Installing mono printer driver This printer provides you the printer drivers with a mono driver so you can use your printer as a monochrome printer. You must install the mono driver on your computer. Following steps guide you through the step by step installation process.
Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s Guide. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. The following procedure describes the general steps required for printing from various Windows applications.
Select the folder and assign a name of the file and then click OK. Printer Settings You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job.
Make sure that Source is set to the corresponding paper tray. Use Manual Feeder when printing on special materials like envelopes and transparencies. If the paper source is set to Auto Selection, the printer automatically picks up print material in the following tray order: Tray1 or Tray2.
• Color Matching : You can adjust the appearance of images by changing the settings in the Settings option. Especially Samsung DigiColor feature helps produce printed output that faithfully reproduces the colors and tints of sky and grass. It is intented to be used to print photographs, but will change the color output of any color printout.
• Print Subset: You can set the sequence in which the pages print. Select the print order from the drop-down list. - Normal (1,2,3): Your printer prints all pages from the first page to the last page. - Reverse All Pages (3,2,1): Your printer prints all pages from the last page to the first page.
To use a saved setting, select the item from the Favorites drop down list. The printer is now set to print according to the Favorites setting you selected. To delete a Favorites item, select it from the list and click Delete.
User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is similar. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. This chapter includes: •...
Printing Booklets This printer feature allows you to print your document on both sides of the paper and arranges the pages so that the paper can be folded in half after printing to produce a booklet.
Click OK and print the document. : If your printer does not have a duplex unit, you should complete the printing job manually. The printer prints every other page of the document first. After printing the first side of your job, the Printing Tip window appears.
“DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. There are several predefined watermarks that come with the printer, and they can be modified, or you can add new ones to the list. Using an Existing Watermark To change the print settings from your software application, access printer properties.
Regards WORLD BEST print a letter with your company’s letterhead, you do not need to load preprinted letterhead paper in the printer. You need only tell the printer to print the letterhead overlay on your document. Creating a New Page Overlay To use a page overlay, you must create a new page overlay containing your logo or image.
CD-ROM to print a document. PPDs, in combination with the PostScript driver, access printer features and allow the computer to communicate with the printer. An installation program for the PPDs is provided on the supplied software CD-ROM. Printer Settings...
Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s Guide. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. Setting Up a Host Computer Start Windows.
Programs or All Programs → your printer driver name → Smart Panel. OTES • If you have already installed more than one Samsung printer, first select the printer model you want in order to use the corresponding Smart Panel. Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select your printer name.
Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select Printer Setting. Change the settings. To send the changes to the printer, click the Apply button. If your printer is connected to a network, the OTES SyncThru Web Service window appears instead of the Printer Settings Utility window.
• Configuring Printer Properties • Printing a Document Getting Started The supplied CD-ROM provides you with Samsung’s Unified Linux Driver package for using your machine with a Linux computer. After the driver is installed on your Linux system, the driver package allows you to monitor a number of machine devices via fast ECP parallel ports and USB simultaneously.
When the installation is complete, click Finish. The installation program has added the Unified Driver Configurator desktop icon and Samsung Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the onscreen help that is...
Printers configuration has the two tabs: Printers and Classes. Printers Tab You can see the current system’s printer configuration by clicking on the printer icon button on the left side of the Unified Driver Configurator window. Switches to Printer configuration.
• Refresh : Renews the classes list. • Add Class... : Allows you to add a new printer class. • Remove Class : Removes the selected printer class. Ports Configuration In this window, you can view the list of available ports, check the status of each port and release a port that is stalled in busy state when its owner is terminated for any reason.
To abort the current job, click Cancel. Printing Files You can print many different types of files on the Samsung machine device using the standard CUPS way - directly from the command line interface. The CUPS lpr utility allows you do that.
CD-ROM drive. Double-click the Samsung_CLP on your Macintosh desktop. Double-click the MAC_Installer folder. Double-click the MAC_Printer folder. Double-click the Samsung CLBP Installer OSX icon. Click Continue. Click Install. After the installation is finished, click Quit. Uninstalling the printer driver Insert the CD-ROM which came with your printer into the CD-ROM drive.
SEC000xxxxxxxxx from the printer box, where the xxxxxxxxx varies depending on your machine. Click Add. If Auto Select does not work properly, select Samsung in Printer Model and your printer name in Model Name. Your machine appears on the Printer List and is set as the default printer.
• You can check your printer name in the supplied CD- ROM. Printing a Document When you print with a Macintosh, you need to check the printer software setting in each application you use. Follow these steps to print from a Macintosh.
Page 93
If you load a different type of print material, select the corresponding paper type. Printer Features This tab provides options for selecting the paper type and adjusting print quality. Select Printer Features from the Presets' drop-down list to access the following features: Fit to Page •...
Select the page order from the Layout Direction option. To print a border around each page on the sheet, select the option you want from the Border drop-down list. Click Print, and the printer prints the selected number of pages on one side of each page.
Page 95
Windows 14 Linux driver, install 27 printer properties 30 printing 31 Macintosh driver install 32 printing 34 setting up the printer 33 n-up printing Macintosh 36 Windows 18 orientation, print 31 Windows 14 overlay create 22 delete 22 print 22...
Page 96
resolution Windows 15 toner save 15 true-type option 15 software install Macintosh 32 Windows 4 reinstall Windows 10 system requirements Macintosh 32 uninstall Windows 11 status monitor, use 25 toner save, set 15 uninstall, software Windows 11 uninstalling driver Linux 28 watermark create 21 delete 21...