Sony DAV-F200 Operating Instructions Manual page 24

4
Attach the stand cover to the rear of the control unit.
Store the connected cables and excess portions of the cable ties inside the stand cover (1), then
secure the stand cover with the 4 screws (2).
1
2
Note
• Make sure that the cables are not twisted or pinched when attaching the stand cover.
• If the stand cover does not close properly, re-organize the cables.
• Be careful not to pinch any cables while tightening screws.
5
Attach the 2 seals (for stand cover) to hide the tightening screws.
6 Connecting the AC power cords (mains leads)
Before connecting the AC power cord (mains leads) of the subwoofer to a wall outlet (mains), connect
the front speakers to the subwoofer.
Bottom of the subwoofer
Subwoofer
24
GB
FRONT R FRONT L
SPEAKER IMPEDANCE USE 3
SYSTEM CONTROL
ONLY FOR HCD-F200
AC power cord (mains lead)
To the wall
outlet (mains)