Fujitsu FI-6010N Operator's Manual page 540

Screen
Admin Tool
Job Settings
LDAP
Connection
504
Message
Connection error.
Cannot connect to this system version.
Session has timed out. Click the
"Close" button in the toolbar to close
the edit settings window.
A fatal error has occurred. Close the
Job Settings session, then try again. If
the problem persists, the administrator
should contact the FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider for help.
Insufficient memory to continue.
Close the Job Settings session, then try
again.
Insufficient free disk space to
continue. Close the Job Settings
session, then try again.
LDAP search base setting is invalid.
LDAP server is busy.
Search has timed out. Contact a
system administrator.
Cannot connect to the LDAP server.
Check that the LDAP access settings
are correct and that the LDAP server is
running and accessible.
LDAP server connection failed SSL
authentication.
LDAP access user name, password
and/or search base settings are invalid.
Action
For more details about the process,
refer to "8.3.3 Failure to Access
the Scanner using a Web Browser,
Admin Tool, or Central Admin
Server" (page 455).
Install the Admin Tool from the
scanner, and try again.
Close the edit settings window,
and try again.
Close the Job Settings session, and
try again.
Ensure that there is enough
memory capacity available, and try
again.
Ensure that there is enough free
disk space available, and try again.
Correct the LDAP settings.
Wait for a while, and try again.
Contact a system administrator.
Contact a system administrator.
Contact a system administrator.
Enter a valid user name and
password, and try again.