Chevrolet 2003 Avalanche Owner's Manual page 157

5. Stow both bows and the front and rear rails in the
storage bag as shown. When all components of the
tonneau cover are secured in the bag properly,
zip the bag shut.
Reverse the procedure to reinstall the tonneau cover
using the following suggestions:
•
When reinstalling the front rail, start by holding the
back edge of the rail (edge nearest you) up and
then twisting the back edge down while pushing it
into place.
•
Both bows are the same size and therefore
interchangeable.
•
When placing the bows in the side rails, it is easiest
to place the spring-loaded bow end in first.
•
When reinstalling the tonneau cover, start at the
front, near the cab. Place the plastic lip into the
front rail, then the rear rail, and finish with the side
rails.
To clean the tonneau cover, use mild soap and water. If
necessary, use a soft bristle brush to remove dirt
trapped in the grain of the material.
•
When placing the bows,
locate the small notches
(arrow) in the side
rails. These notches
receive the tang on the
bow ends and help
the bows seat into
place.
2-83