Using The Control Panel; When To Make Control Panel Settings; How To Access The Control Panel Menus; Accessing The Control Panel Menus - Epson AL-C300 Series User Manual

AL-C300 Series User's Guide

Using the Control Panel

Accessing the control panel
menus

When to make control panel settings

In general, printer driver settings override settings made
using the control panel.
You should make the following settings by using the
control panel because these settings cannot be made in
the printer driver.
❏ Settings to select emulation modes and IES
(Intelligent Emulation Switching) mode
❏ Settings to specify a channel and configure the
interface
❏ Settings to specify the size of the memory buffer
used to receive data
How to access the control panel
menus
Note:
Some menus and items appear only when a corresponding
optional device is installed or an appropriate setting has
been done.
A
Press the r Right button to access the control
panel menus.
B
Use the u Up and d Down buttons to scroll
through the menus.
C
Press the r Right button to view the items in a
menu. Depending on the menu, the LCD panel
displays an item and the current setting
separated ( YYYY=ZZZZ), or only an item (
YYYY).
D
Use the u Up and d Down buttons to scroll
through the items, or press the l Left button to
return to the previous level.
Getting to Know Your Printer
E
Note:
❏ You need to turn the printer off and then on to activate
the settings you changed in the Network Menu, USB
Menu, USB Host Menu, or RAM Disk in the Setup
Menu.
❏ The OK button can be used instead of the r Right
button in step 3 or 5.
F
15
Press the r Right button to carry out the
operation indicated by an item, such as printing a
configuration status sheet or resetting the
printer, or to view the settings available for an
item, such as paper sizes or emulation modes.
Use the u Up and d Down buttons to scroll
through available settings, then press the r Right
button to select a setting and return to the
previous level. Press the l Left button to return
to the previous level without changing the
setting.
Press the l Left button once or more times to exit
the control panel menus.