Fujitsu Airstage J-II Service Manual page 199

6. INVERTER PCB, FILTER PCB and ACTPM removal
Remove the 4 mounting screws
6-1. FILTER PCB removal
Remove the connectors and screws.
Note the tightening torque
at the installation.
Tightening torque is 2.5 + 0.2N m.
(except for the earth screw)
Screws
FILTER PCB
Screws
(AC IN)
Earth screw
-
Open the CONTROL BOX (MAIN).
ACTPM
INVERTER PCB
Remove the spacers.
(8 places)
06-03
Spacers