Problem
(5) The machine has "locked up" (i.e., noth-
ing happens when a key is pressed).
(6) The half cut is either too deep or not deep
enough.
Solution
●
Reset the machine by:
- (PT-3600) unplugging the AC adaptor,
and leaving it unplugged for about one
minute, then and plugging it in again
- (PT-9600 only) pressing the reset button
in the battery compartment at the bottom
of the machine
☞
All text and formats in the display and all
text files stored in the memory will be
erased.
●
Follow the procedure on page 53 to adjust
how deep laminated tape is cut.
TROUBLESHOOTING
61