Brother P-Touch 9600 User Manual page 67

ERROR MESSAGE
LENGTH LIMIT!
LINE LIMIT!
XX LINES MAXIMUM
MEMORY FULL!
NO FILES!
OVERFLOW!
REPLACE BATTERIES!
(PT-9600 only)
SET 6mm!
CAUSE
● This message appears if you try
to print or use the Layout pre-
view function when the length
of the text is greater than the 1
m limit.
● This message appears if you try
to print or use the Layout pre-
view function when the number
of lines in the text is greater
than the maximum possible for
the installed tape. (Since the
number of lines possible
depends on the width of the
tape, the message that appears
depends on the tape width.)
16 LINES MAXIMUM
13 LINES MAXIMUM
10 LINES MAXIMUM
(
6 LINES MAXIMUM on 12 mm tape
(
4 LINES MAXIMUM on 9 mm tape
(
3 LINES MAXIMUM on 6 mm tape
● This message appears if you try
to store a text file after the maxi-
mum number of characters has
already been stored in the mem-
ory.
● This message appears if no files
are stored in the memory when
you try to recall, delete or print
one.
●
This message appears if the
result of the conversion with the
Euro conversion
exceeds 10 digits.
● This message appears when the
installed Ni-MH battery is about
to run out, or when the battery
has reached a high voltage.
● This message appears if a 6-
mm-wide tape cassette is not
installed when printing an Auto
format template created for 6-
mm-wide tape.
●
●
( )
on 36 mm tape
( )
on 24 mm tape
( )
on 18 mm tape
)
)
)
●
●
●
function
●
●
ERROR MESSAGE LIST
SOLUTION
Delete some of the text.
Reduce the number of
lines or install a wider
tape.
Delete an unwanted file to
make space for the new
one.
Store a text file before try-
ing to recall, delete or
print one.
Change the euro conver-
sion setup so that the
result will not exceed 10
digits.
Replace the battery or use
the AC adapter.
Install a 6-mm-wide tape
cassette.
57