Brother P-Touch 9600 User Manual page 45

Block margin function
(B. MARGIN)
The width of the margins between text blocks
can be set between 0.0 cm and 30.0 cm. The
left and right margins for each text block will
have a width that is the specified setting. If the
AUTO setting is selected, the block margins will
be 0.0 cm if only one text block has been cre-
ated and 0.3 cm if multiple text blocks have
been created.
To change the setting for the Block margin
function:
1 Select GLOBAL FORMAT (OR hold down
d and press 1) as described on
pages 24.
NOTE
This step may be skipped if settings for several for-
mat functions are being applied at the same time.
2 Rotate r until B. MARGIN is displayed,
and then press r (OR press j or k until
B. MARGIN is displayed). The current set-
ting is shown on the left side of the display.
1 2 3 4 5 6 7 8 9
R
R
G
11/13
R
NO
H
R B. MARGIN
L M
R
I
AUTO
R
J
AUTO 0.4
Length Margin
3 Rotate r (OR press m or g) until the
desired setting is displayed, or use the
number keys to type in the desired block
margin width.
NOTE
☞
To return the function to its default setting
(AUTO), press the space bar.
☞
To change the setting in 1.0 cm steps, hold
down either m or g, and then release the key
when the desired setting is displayed.
☞
To return to the text without changing the for-
matting, press e (OR hold down d and
press 1).
K Q Q Q Q Q
A B C D E F
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
4 Press r (OR press n) to apply the setting.
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several format settings
at the same time, press j or k to select the func-
tion, and then press m or g to select the desired
setting. Press n only after the necessary functions
have been set.
Block length function
(B. LENGTH)
Normally, the length of each text block automat-
ically adjusts to fit the length of the entered text.
However, with the Block length function, you
can set each text block to a length between 0.6
cm and 99.5 cm.
To change the setting for the Block length
function:
1 Select GLOBAL FORMAT or BLOCK FOR-
MAT (OR hold down d and press 1
or 2) as described on page 24 to 25.
NOTE
This step may be skipped if settings for several For-
mat functions are being applied at the same time.
2 Rotate r until B. LENGTH is displayed,
and then press r (OR press j or k until
B. LENGTH is displayed). The current set-
ting is shown on the left side of the display.
1 2 3 4 5 6 7 8 9
R
R
G
12/13
R
H NO
R
B. LENGTH
L M
R
I
AUTO
R
J
AUTO 0.4
Length Margin
3 Rotate r (OR press m or g) until the
desired setting is displayed, or use the
number keys to type in the desired block
length.
Ch. 3 Functions
K Q Q Q Q Q
A B C D E F
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
35