Brother P-Touch 9600 User Manual page 40

Ch. 3 Functions
4 Press r (OR press n) to apply the setting.
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several format settings
at the same time, press j or k to select the func-
tion, and then press m or g to select the desired
setting. Press n only after the necessary functions
have been set.
Line effects function
(LINE EFFECTS)
The Line effects function enables you to under-
line or strike out certain parts of your text.
OFF
UNDERLINE
When any setting other than OFF is selected for
the text at the cursor's current position, the Line
effects indicator at the top of the display comes
on.
1 2 3 4 5 6 7 8 9
R
R
G
<<< P-touch >>>
R
N O
H
R
L M
R
I
1:_
R
J
AUTO 0.4
Length Margin
To change the setting for the Line effects
function:
1 Select GLOBAL FORMAT, BLOCK FORMAT
or LINE FORMAT (OR hold down d and
press 1, 2 or 3) as described on
pages 24 to 25.
NOTE
This step may be skipped if settings for several for-
mat functions are being applied at the same time.
2 Rotate r until LINE EFFECTS is displayed,
and then press r (OR press j or k until
LINE EFFECTS is displayed). The setting for
the text at the cursor's current position is
shown on the left side of the display and a
sample can be seen on the right side.
30
STRIKEOUT
K Q Q Q Q Q
A B C D E F
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
1 2 3 4 5 6 7 8 9
R
R
G
06/13
R
H NO
R
LINE EFFECTS
L
R
I
M
OFF
R
J
AUTO 0.4
Length Margin
3 Rotate r (OR press m or g) until the
desired setting is displayed.
NOTE
☞
If "*****" appears as a setting, the Line effects
function has already been applied to either a
line in the current text block (if the Block format
or the Global format function is being set) or a
block in the current text (if the Global format
function is being set). Changing the setting will
cancel the setting that was previously applied.
☞
To return the function to its default setting
(OFF), press the space bar.
☞
To return to the text without changing the for-
matting, press e (OR hold down d and
press 1, 2 or 3).
4 Press r (OR press n) to apply the setting.
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several format settings
at the same time, press j or k to select the func-
tion, and then press m or g to select the desired
setting. Press n only after the necessary functions
have been set.
Frame function (FRAME)
With the Frame function, you can choose from a
variety of frames and highlights for emphasising
certain parts or all of the text in your label. For
samples of the available frame settings, refer to
page 74. When any setting other than OFF is
selected for the text at the cursor's current posi-
tion, the Frame indicator at the top of the display
comes on. The lines on the right side of the indi-
cator, starting from the top, show if the Frame
setting is applied to the entire text, the block or
the line.
K Q Q Q Q Q
A B C D E F
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size