Memory Functions; Storing Settings - Mercedes-Benz G-Class Operator's Manual

passenger side returns to the driving
position.
Using the memory button
Left-hand exterior mirror
:
Right-hand exterior mirror
;
Adjustment button
=
Memory button
?
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M ?.
X
Make sure that the SmartKey is in
position 2 ( Y page 139) in the ignition lock.
X
With the exterior mirror on the front-
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
X
Press memory button M ? and one of the
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
the steps.

Memory functions

Calling up a stored parking position
setting
Left-hand exterior mirror
:
Right-hand exterior mirror
;
Adjustment button
=
Memory button
?
X
Turn the SmartKey to position
2 ( Y page 139) in the ignition lock.
X
Adjust the exterior mirror on the front-
passenger side using button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior
R
mirror on the driver's side
Memory functions

Storing settings

G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic
conditions by the seat moving of its own
accord, and as a result cause an accident.
95
Z